Part Number: DRV110EVM Hi,
I received DRV110EVM and my use cas is Powered by a DC supply source greater than 15v
Specification: Power supply is 24VDC: P1:1 and P1:3 Solenoid coil: P1:2 and P1:4 IPeak is 1.250A IHold is 650mA TKeep between 200ms…
Part Number: DRV110EVM Other Parts Discussed in Thread: DRV110 Tool/software: I am developing a product that includes solenoids. There will be two driven in parallel.
Specs are
Supply Voltage - 24VDC
Coil Voltage rating - 12V
Coli Resistance …
Part Number: DRV110EVM Other Parts Discussed in Thread: DRV110 Tool/software: I am driving a solenoid that requires an Ipeak of 4 A and an Ihold of 3 A. Can the DRV110 IC operate under these conditions? Are the operating Ipeak and Ihold currents limited…
Part Number: DRV110EVM Hi,
I am using DRV110EVM board to drive a 24V/10W solenoid. One of the required parameter is Rosc which is used to set the frequency PWM.
Can someone please explain what parameters are used to define the frequency?
Thanks…
Part Number: DRV110EVM Other Parts Discussed in Thread: DRV110 Hi,
Can someone explain to me to how to size R3.
Let's say DCSUPPLY = 24VDC and I peak <= 500mA.
Thanks.
Part Number: DRV110EVM Dear Specialists,
My customer has a question about DRV110EVM.
I would be grateful if you could advise.
I couldn't find any information about this.
---
Is the DRV110EVM manufactured using lead-free solder?
---
I appreciate…
Part Number: DRV110EVM The shipment of this EVM needs custom clearance. Could you offer info. below.
1. Origin Production country
2. Size, Length, Width and Height
3. Weight
Regards
Brian
Part Number: DRV110EVM Other Parts Discussed in Thread: DRV110 Hi,
We had issues of peak ripple current with DRV110EVM Evaluation module (valve load ).
we are observed the peak current at the time of valve on condition ,valve on/off & off/on conditions…
Part Number: DRV110EVM Other Parts Discussed in Thread: DRV110 Hi,
We had issues peak ripple current with DRV110EVM Evaluation module.
Please waveform details as below.
Case 1: Peak to peak ripple current while valve on to off & off to on condition…
Part Number: DRV110EVM Hi Team, Our customer would like to request the physical dimension of mounting hole for DRV110EVM to use for fitting. I found related thread but only the board dimension is given: https://e2e.ti.com/support/motor-drivers/f/38/t…
