Part Number: DRV591 Hi Support Team.
In the Qualification Summary, the results of ESD-HBM and CDM are described as "See data sheet". However, the datasheet does not show the results of ESD.
Please tell me ESD data (HBM data , CDM data) of DRV591VFPR…
Part Number: DRV591 Hi Support Team.
In the Qualification Summary, the results of ESD-HBM and CDM are described as "See data sheet". However, the datasheet does not show the results of ESD.
Please tell me ESD data (HBM data , CDM data) of DRV591VFP…
Part Number: DRV591 Hi team
My customer has a common problem when using DRV591: Overtemperature protection was found to be occasionally triggered (the FAULT1 is 1 and the FAULT0 is 0 ) during testing, however, the temperature is cool to the touch during…
Part Number: DRV591 Hi team,
My customer want to use the IBIS module of DRV591 to do the simulation.
I can not find the IBIS module in the TI.com.
Can you help to provide the IBIS module of this part?
Lacey
Thanks a lot!
Part Number: DRV591 Hi team,
Could you please help to review the attached schematic design and help to confirm if customer can change L5204/L5205 from 10uH to 2.2uH?
will the change have impact to the performance or the output capacity?
Part Number: DRV591 Hello All,
My customer Huawei uses DRV591 to drive TEC, the output current will reach 3A when the temperature is -40C. They want to know:
1. In our datasheet, the max output current is 3A(typ), what's the min and max value? considering…
Part Number: DRV591 Hi Team,
My Customer is creating a 3D model for this device. He wanted to have a detailed lead dimension of DRV591. He already knows that the land pattern is present at the device datasheet unfortunately, he insisted he wants the…
Part Number: DRV591 Other Parts Discussed in Thread: DRV593 Hi team,
My customer now is using DRV591. Now they have willing to replace it with DRV593.
Could you let me know by using exatctly the same DRV591 schematics, could DRV593 be directly put…
Part Number: DRV591 Other Parts Discussed in Thread: DRV593 Hi team,
My customer is always using DRV591 for TEC driver. Now they have the requirement of less BOM size. As you know, the inductor near the output of DRV591 is very big. Do we have some…
Part Number: DRV591 Hi team,
My customer is always using DRV591. But in their new project, their board temperature will be 90C which exceeds our datasheet TA range. But the calculated junction temperature will be 125C, still lower than the TJ max in…
