Part Number: DRV593
Hi team,
The customer is using DRV593. His schematic is in the attach. VIN- is fixed 2.5V. According to the Equation 10 that is on
page 16 of the datasheet, when VIN+ is 0.4V, the output voltage is 4.61V. The output current cannot be…
Part Number: DRV591 Other Parts Discussed in Thread: DRV593 Hi team,
My customer now is using DRV591. Now they have willing to replace it with DRV593.
Could you let me know by using exatctly the same DRV591 schematics, could DRV593 be directly put on…
Other Parts Discussed in Thread: DRV593 May i know the suitable solution for LTC1923EUH#TRPBF ? Customer is looking for a PMIC controller with OP Amplifier. (they are using LTC1923EUH#TRPBF+LTC2053HDD#TRPBF now)
Other Parts Discussed in Thread: DRV593EVM , DRV593 I am driving a TEC with the DRV593 Evaluation module. This TEC draws 0.9A at 5V when driven directly via a PSU. But through the DRV593EVM I am getting a max of 0.45A. The voltage across the TEC is driven…
Part Number: DRV592 Other Parts Discussed in Thread: DRV594 , , DRV593 Hello there.
We plan to use Peltier Element in our application to keep the temperature in the desired range.
When the temperature is above a certain limit (e.g. 50C), we would drive…
Hi Alexander,
We actually have a dedicated line of TEC drivers! They are DRV591, DRV592, DRV593, DRV594 and DRV595.
Hope this helps!
Best Regards,
Robert Clifton
Part Number: DRV594
Dear Sirs,
I am using the DRV594 Evaluation kit to test the possibility of driving a Peltier Module (2.7Ohms resistance). DRV594 is supplied with 3.3V and driven the following way:
VIN- is kept to VDD/2 and VIN+ is set by the output…
Part Number: DRV595 Other Parts Discussed in Thread: DRV593 , Hi team,
My customer wants to use the DRV595 as the TEC driver. Do we have the DRV595EVM available? Whether we can use the DRV593 EVM to evaluate the DRV595? What's the formula of DRV595(OUTPUT…
Part Number: LMH6526 Other Parts Discussed in Thread: DRV594 , DRV595 , DRV593 , OPA2192 Hello,
Our customer is looking for H bridge TEC driver amplifier driving at least 3A, 3V+/-1.8V output voltage from 200Hz 0V to 3.3V PWM input. I am not sure if LMH6526…