Part Number: DRV8825EVM I have installed the DRV88xx EVM Software (Rev E.) from:
https://www.ti.com/lit/zip/slvc342
Following installation instructions shown in the GUI guide:
https://www.ti.com/lit/ug/slvu361c/slvu361c.pdf?ts=1651110938508
Upon booting…
Part Number: DRV8825EVM Other Parts Discussed in Thread: LAUNCHXL-F28379D Can DRV8825EVM work with Windows 10?
I tried slvc342c and slvc502a packages. No luck. USB Communication on COM4 established with both packages - OK. Power supply 12V DC - OK. Stepper…
Part Number: DRV8825EVM Other Parts Discussed in Thread: DRV8880EVM , DRV8880 Hi,
I am looking for an easy to implement stepper motor drive set-up to introduce controlling of stepper motors as part of a laboratory session for students from the Diploma…
Part Number: DRV8825EVM
How is the Speed Control value in the DRV8824-25 GUI converted into the Frequency Hi and Lo bytes which are sent to the microprocessor?
I noticed that the value in the Pulses Per Second control is not converted directly into two…
Part Number: DRV8825EVM Other Parts Discussed in Thread: DRV8825 Hi team,
I am using DRV8825 stepper Driver ,Driver ic is getting heated,
Stepper driver sense resister 0.2ohm and Vref is 0.9 volt
Stepper motor specification :
1.24 volt
2. 0.72A each w…
Part Number: DRV8825EVM Hi,
My customer has a issue during installation of DRV8825EVM GUI. He uses Win 10 PC. He can not install GUI of DRV8825EVM for occurring error during installing. Is DRV8825EVM GUI supported Win 10 PC?
Best regards, Shimizu
Part Number: DRV8825EVM Other Parts Discussed in Thread: DRV8825 Hi team,
we used DRV8825 driver, It is working fine in independent module of the drv8825 driver.
Now, we go to integrate all other module in One 6 layer PCB.so please help us how to taken…
Hello Sakthivel
Is it hitting thermal shutdown (TSD). Are you using our DRV8825EVM or is it your own board design (if so, can you provide the layout and schematic)? What is the load you are driving and the application for this?
Best,
Keerthi