Part Number: DS90CR482 I have a DS90CR482 part on a prototype board. The LVDS inputs are driven from an FPGA.
I am not using DC balanced mode. I am running with an 80MHz clock. I have verified that the input clock has a duty cycle of 4:3 (7.14ns high…
Other Parts Discussed in Thread: DS90CR481 Hi, I'm using the DS90CR481, data sheets say, LVDS clock signal shall be "1111000" or "1110000" pattern, but it's seems "11110000" and "111000" on DS_OPT applied high and BAL applied high of clock_in @100MHz…
Other Parts Discussed in Thread: DS90CR482 , DS90CR481 Hello~
As you know very well, /PD pin of DS90CR481 & DS90CR482 has internal pull-down resistor.
I'd like to know the internal pull-down resistor value of /PD pin in DS90CR481 & DS90CR482.
Thanks…
Part Number: DS90CR288A Other Parts Discussed in Thread: DS90CR482
Hi team,
The customer would like to use DS90CR288A. The DS90CR288A datasheet shows the Receiver Input Range Voltage is 0~2.4V
and the Differential Input High Threshold is -100mV…
Other Parts Discussed in Thread: DS90CR482 , 74ACT16374 Hello,
the 74ACT series is fine but a litle outdated. I'm looking for an 74ACT374 / 74ACT16374 replacement which provides about 35% shorter setup and hold times. Key features TTL input (chip ist…
Hi Sakai-san,
I still have not received any update. It seems that we cannot just fix the pinout image without updating the entire datasheet to meet current TI standards, so it may take a long time if it's approved. It would be best for the customer…
