Part Number: DS90UB964-Q1 dear cindy
Hi Raymond,
Thank you for the clarification on the schematic.
I noticed in the register configs that you have continuous clock mode turned off in register 0x33. For debugging purposes, can you try enabling continuous…
Closing this thread now that it is being continued on another E2E thread: https://e2e.ti.com/support/interface-group/interface/f/interface-forum/1226011/ds90ub964-q1-ds90ub964-rear-view-camera-analysis-continue-2
Part Number: DS90UB964-Q1 Other Parts Discussed in Thread: TDES960 Hi team,
As title. Do we have DS90UB964-Q1 non-Q solution? or similar solution.
BR,
Jimmy
Part Number: DS90UB964-Q1 I want to connect 964 to the i2c address of 933933, which is 0x20. Currently, I am not connected. Attached is my configuration of 964. Please help me check if it is correct.
Part Number: DS90UB964-Q1 hi team
you share how to configure the data type as RGB888 when 964 pair with 953 in csi mode?
0x70 and 0x71 is used for RAW mode pair with 933.
https://e2e.ti.com/support/interface-group/interface/f/interface-forum/751304/ds90ub964…
Part Number: DS90UB964-Q1 Hi Team,
From customer feedback, when the used the 5M and 10M cable to test the basic check. they have voltage glitch. Would you please help share your comment?
Many thanks
Part Number: DS90UB964-Q1 Hi
The customer has a problem, as shown in the picture below, there are four camera in channels on the left, and two CSI out channels in the green circle on the right May I ask how to use these two CSI outs? Based on the total…
Part Number: DS90UB964-Q1 Other Parts Discussed in Thread: DS90UB960-Q1 , DS90UB933-Q1 , DS90UB935-Q1 , DS90UB913A-Q1 , DS90UB962-Q1 , hi team,
please tell difference of 960/962/964
Part Number: DS90UB964-Q1 hi team,
I have serval questions regarding the CSI_PLL_CTL:
1. Do you see any risk of configure 964 0x1F[1:0] to 01? In 960 register, 01 means 1.2Gbps.
2. If any concern, how to change 0x1F register on the fly? For example,…