Hello Scott,
There are two non-P2P recommendations here TPS7A2015PDBVR which will meet the output current spec, however the IQ will be worse at roughly 6.5uA. The other alternative would be TPS7A0315PDBVR which will not meet the output current spec…
Part Number: TMDSRM48HDK
Tool/software:
Cannot connect to TI HDK for RM48x Hercules Microcontrollers using Black-Hawk XDS560v2 trace emulator (windows 10).
ATTEMPT #1 uses 60-Pin MIPI connector on TI Hercules HDK target PCB:
Emulator is pingable…
The difference between the EVM and the custom PCB is the shunt resistor value. The shunt resistor used in the custom PCB is 100uOhm.
https://www.mouser.kr/ProductDetail/Vishay-Dale/WSBS8536L1000JK20?qs=DRkmTr78QASynhUVH%252BXn5A%3D%3D
And I am using…
Part Number: TMS320F28379D Other Parts Discussed in Thread: AM1802
Tool/software:
Hello,
I have a working XDS200, which is able to connect and debug a TMS320F28355. Also, it worked with a TMS320F28379D control card until several weeks ago. Since…
Hi David,
Thanks for your reply！
a. Our current plan is designed based on the following specifications.
b. The power pole is CSAB1040A-3R3M, The specifications are as follows:
CSAB1040A-3R3M_spec.PDF
c. KJ1R5N08LFH cannot work. NTMFS6H800NL…
Hi Vignesh,
Clément said: I would suggest to run a test with an interval of 250 ms between the 1000-byte transfers.
This suggestion was to ensure the data transmitted over UART fits the bandwidth offered by the UART module.
The next step is to ensure…
Hi Gang Hua, Yes, I entered correct i/o image formats as shown in below images but still i am getting that output. Is it because of spec file?? And also can you check at this code and tell me if i am missing something for 3280x2464 image s = 1; %MESH…
Hello Hemraj,
Here is some initial information on compression ratio: Encoder compression ratio is use-case specific. I have done some testing on a h264 1920x1080@30fps stream with 569 frames and got a compression ratio of 70:1. Compression ratio can…
Hello Diego,
I am attaching the gg file and log file when I checked the SOC accuracy.
SocAccuracy_20250729.log
SocAccuracy_20250729GG.csv
The battery configuration is 2S1P and ChemID is 2088 because 3608 is obsolete.
We were told that the…
