Part Number: INA148-Q1 Other Parts Discussed in Thread: INA148 , INA592 , INA149 Hello, I plan to use this as part of a current sense amplifier circuit due to its wide Abs max for inputs and high common mode range. For 48V reverse polarity, the part is unpowered…
Part Number: INA149 Other Parts Discussed in Thread: INA148 , , INA117 , TINA-TI My LTSpice sim of the models provided by TI for the INA149 do not work. I use the models for your INA148 and they work just fine, but not the INA149s.
The circuit runs 0-20uA…
Part Number: INA148 Hello,
Can you please provide the marking specifications for this part?
If the YMLLL marking is 26Y83, I assume that the first one is the year 2=2022, 6=month, and LLL assembly lot code?
Thank you!
Part Number: INA148 Other Parts Discussed in Thread: INA149 Hi team, I'm looking for the newest products that can be replaced from INA148. Because INA148 is a very old device made by BURR-BROWN. I'd be happy with the newest device made by TI. It would…
Part Number: INA148-Q1 Hi,
Is this statement true:
Yes, TI does allow the same product having different mold numbers that are used by the product assembler. TI doesn't dictate the mold numbers that are used by the assembler.
Once the devices are completely…
Part Number: INA148 Hi Amps Team,
I have found the threat where 15V without Vsupply are OK, but what happen if there is a voltage of +/-10V at the input when the part is not powered.
Many Thanks
Best wishes,
Olrik
Part Number: INA148-Q1 Other Parts Discussed in Thread: INA148 , , TINA-TI Hi Team,
I can't find any model of INA148 on our website. How can I get the IBIS or SPICE model of INA148-Q1?
Thanks a lot.
Matthew Chen
Part Number: INA148-Q1 Other Parts Discussed in Thread: INA148 , Question from customer regarding the differences between INA148 and INA148-Q1:
what procedure is used to designate storage temperatures since they appear to be different:
INA148QDRQ1 = …
Part Number: INA148 At present, I have a project to use ina148 chip again. During the use, the sampling output value drifts. The output value jitters about 0.2V. The attachment is the schematic diagram and ina148 output waveform for reference.
项目大概情况如下…
Part Number: INA148 Hi All,
One of my customer is using the INA148 in single supply 12V application, Vref=0V.
What is the CM range, specifically low-limit common-mode input voltage?
Also any issue with the output swinging up to 10.5V.
Thanks,
Regards…