Part Number: INA168-Q1 Other Parts Discussed in Thread: INA168 Tool/software: Hello All,
I am using INA168QDBVRQ1 in my card.
RS=0.02 ohm
RL= 200kohm
CL=100p
I am measuring current on 24dc motor with PWM of 10khz 30%
the dc motor resistance is 5.84 ohm…
Part Number: INA168-Q1 Tool/software: hello everyone, In my application, the maximum current reached 40A, Assuming I set the bias voltage to 1.65V according to the diagram, can the chip output such a high voltage with VOUT=1.65V+40A * 200K * 2m/5K=4.85V…
Part Number: INA168-Q1 Other Parts Discussed in Thread: INA168 , INA240 Tool/software: When FOLD operating,
I checked voltage between OS MRR shunt In and OS MRR shunt Out is 73 mV.
And Shunt Forward voltage 395 mV So we can calculated 732 mA.
And shunt…
Part Number: INA168-Q1 Other Parts Discussed in Thread: INA168 , INA186 Hi All,
I am using the component INA168:
RS = 0.01 OHM
RL = 133KOHM with 100pF parallel capacitor
after it i have buffer amplifier AD8615 with RC output R=10ohm C=1nF and this is connected…
Part Number: INA168-Q1 Hi there,
Could you inform me about terminal finish of the part INA168QDBVRQ1. Could you tell me the thickness of Au in case the terminal finish is NiPdAu or NiAu or Au.
Thanks.
Best Regards,
Kaoutar Ben Kaddour
Part Number: INA168-Q1 Other Parts Discussed in Thread: INA901-SP , , INA168
I am trying to compare some things between the INA168-Q1 and the INA901-SP (5962L1821001VXC). The INA168-Q1 does not exist in the "Current Sense Amplifier Comparison and Error…
Part Number: INA168-Q1 Other Parts Discussed in Thread: INA168 , TINA-TI Hi TI team,
I need to know the delay between Vrs (voltage sampling of current sense resistor) to the output Vout.
INA168.pptx
Part Number: INA168-Q1 Other Parts Discussed in Thread: INA168 , I currently use INA168 and am unable to source it. Is INA168-Q1 functionally equivalent? Is it a drop-in replacement for INA168, with the added benefit of being an automotive-qualified part…
Part Number: INA168-Q1 Hi TI expert
I have looked at the applications mark no ADAS in the datasheet ,can I use the ADAS systems applications?
Thanks
Jacob
Part Number: INA168-Q1 HI,
I intend to use the INA168-Q1 to measure the input current of my converter. The power supply start-up sequencing will supply the V+ late after (few 100's of ms) the Vin- and Vin+ are already established at 48V.
Will it damage…
