Part Number: INA180 Other Parts Discussed in Thread: LM5148 , Can INA180 use to sense output current in inductor DCR sensing method (voltage across Ccs) in conditon Vout = 12V , Buck controller = LM5148 ?
Part Number: INA180 Hello
Below diagram is the design of Low Side Unidirectional current measurement upto 10Amps , current flows in both direction over 7.5 mohm Shunt, which leads to 7.5x10 = +/- 75mV drop in the input which is in the range of ' Common…
Part Number: INA180 Hi team,
The customer would like the ability to adjust the gain themselves. Is it possible to add an additional resistor to change the gain? I understand that we have different parts available with gains ranging from 50 to 200, but…
Part Number: INA180 Hi experts,
My customer is currently qualifying INA180A1IDBVR (SOT-23-5 package) for use in a high-reliability application and need clarification on the lead finish material. The product page lists the lead finish as "Call TI | Sn…
Part Number: INA180 Other Parts Discussed in Thread: OPA991 , TINA-TI Tool/software: Hello,
I am working on a current source (100/200mA).
To minimise power losses in the shunt, I've chosen to use an INA180 in the feedback loop.
The system does not…
Part Number: INA180 Other Parts Discussed in Thread: MSPM0G1505 , Tool/software: Hi,
Can the output of the INA180A1 be directly connected to one of the A/D channels of MSPM0G1505 inputs to read the current?
The Microcontroller A/D input resistance…
Part Number: INA180-Q1 Other Parts Discussed in Thread: INA180 , Tool/software: Hello team,
What is the input impedance for IN+ and IN- ?
My customer tested and found 50uA for IN+ and IN- totally, due to the sensor is connected to KL30, so we need…
Part Number: INA180 Tool/software: Hi,
We are planning to use INA180A1DBVR for high end current sensing of 12V rail. The 12V is taken to a DC-DC convertor which generates 3V3 to the system.
The IN+/IN- of INA180A1DBVR are connected across the current…
Part Number: INA180-Q1 Problem Phenomenon:
Two cases of INA180A2-Q1 short-circuit and failure have occurred during the recent customer testing phase. The schematic diagram (SCH) is shown below:
The component in question is the PTC for automotive air…
