Part Number: INA207 Hi Team,
Would you advise that,
Up to 80V is acceptable on the VIN + and VIN- pins.
Regarding to this, is there any problem even when no voltage is supplied to the Vs pin?
Thanks
Best regards
Shidara
Part Number: INA207 Dear Support team,
According to datasheet, in absolute maximum voltage of V+/- at common mode is defined as -18~80V. Is it non-relation with Vs condition, Vs=open or Vs=0V? When V+/- has some voltage level at "Vs=0V" condition, will…
Part Number: INA207 Dear Support team,
Could you let me know the status of CMP1 OUT just after power on? We found that CMP1 OUT is latched just after power on. Is it correct? If it is ture, please let me know waiting time of RESET for avoiding latch of…
Other Parts Discussed in Thread: INA207 I am using the INA207 as a replacement of the MAX4375. Its larger input voltage range is an advantage and we started using the INA207 as a product replacement and for new designs. The exact part number I am using…
Hello Priya,
1 - I am not sure what your query is here. If the ALERT is asserted and BSS138 MOSFET is turned on, I suspect that alot of current will pass through its relatively small RDSon if you removed the 10kohm resistor that should be in series with…
Other Parts Discussed in Thread: INA206 , INA208 , INA207 Hello,
We are planning to use the INA206. However, we are a bit confused what is meant by "latch" in the data sheet? The follow is from the datasheet.
The INA206, INA207, and INA208 devices…
Other Parts Discussed in Thread: TINA-TI Update of TINA9-TI Spice Model Libraries and Example Circuits
This note describes the step-by-step process for updating the TINA9-TI Spice Macro Libraries and Example circuits. The update is initiated by selecting…
Hello Yassine,
The INA270 is a differential amp with -16 +80V input range.
There are other members of current sense devices that may work.
TI Home > Semiconductors > Amplifiers > Current Sense Amplifiers >
Will these perform the function…
I tried one unit in the lab just now and found that with 5V supply and nothing on the inputs, I measured roughly 1.6V on VIN+ and VIN-. I swept the Vs around from 3 to 7 and saw the voltage on the inputs change from roughly 1.5V to 1.7V. Also, there was…
