Part Number: INA211 Other Parts Discussed in Thread: LM7705 , INA199 Tool/software: Hi Team,
Do we have any part could be a good competitor to WS74199Q-10?
WS74199Q-10/TR | Datasheet | WILLSEMI(Will Semicon) | LCSC Electronics
Also, do we have products…
Part Number: INA211 Tool/software: Hello expert,
My customer is asking for INA211 output current capability. I checked previous post there is one reply related to this topic, link is shown below.
For my customer's reuqirement, V+ = 18V and output…
Part Number: INA211 Other Parts Discussed in Thread: INA190 Hello,
We are sensing a very small DC current with the INA211, and need very low input offset current across a wide temperature range.
Could you please help us with minimum and maximum values…
Part Number: INA211 Hi Support team
VCCS1=11V
12V=12.3V
12VF=12.6V
shunt resistor = 0.1m ohm
max output current : 160A
0.1m*160*500= 8V
12VIO= 8V
base on following application circuit,
I have few questions
1. what is suitable value…
Part Number: INA211 Customer would like to understand the max output current capability of INA211, so that they can select the resistor values for the voltage divider. Could you please help check for it? Thank you.
Part Number: INA211 Other Parts Discussed in Thread: INA210-215EVM , INA190 , INA186
Hi,
I have a few questions concerning the INA211 current sense amplifier.
First, I am assuming here that the GND pin is the negative rail voltage pin of the op…
Part Number: INA211 Can INA21X work like a DMM?(No common ground with load)
Need to add other resistor like R1 and R2?
And what will happen if IN+ and IN- float in a short time?
Part Number: INA211 Hello together,
I want to reduce the output voltage of the INA211, but it is not possible to change the shunt resistor. We are driving the INA211 with an input filter like on chapter 7.4.1 in the datasheet. The idea is to add a resistor…
