• RE: INA213-Q1: calculation of worst-case current sensing figures

  

  Levi Devries

  Hello Hachim, The tolerance for the INA213-Q1 is 30% for all of the internal resistors, as mentioned in the datasheet section on input filtering. Let me know if you have any more questions, Levi DeVries

  • 5 months ago
  • Amplifiers
  • Amplifiers forum

• INA213-Q1: safety requirement and current reading reliability

  

  Smith Chao

  TI Thinks Resolved

  Part Number: INA213-Q1 Other Parts Discussed in Thread: INA213 , Hi Support team, We're going to do function safety about the system diagnosis when any errors happened. So current reading is import for automotive application. I have some questions about…

  • over 3 years ago
  • Amplifiers
  • Amplifiers forum

• INA213-Q1: offset voltage issue

  

  user3941741

  TI Thinks Resolved

  Part Number: INA213-Q1 Other Parts Discussed in Thread: INA213 Hello TI team, I have a question about offset voltage when I read INA213 datasheet, for the Vo is measure by output or output/(Gain+1)(voltage between inverter and non-inverter input)?

  • over 4 years ago
  • Amplifiers
  • Amplifiers forum
Answered

• INA213-Q1: Location of filter in INA213-Q1 to reduce noise

  

  Oliver Kim7

  Resolved

  Part Number: INA213-Q1 Other Parts Discussed in Thread: INA213 , OPA340 , INA233 , INA220 , INA226 , INA219 , INA231 , INA260 Dear team, I use INA213-Q1 to measure amount of current. I want to increase the Rs (See the figure) value more than 10 ohm because of…

  • Resolved

  • over 5 years ago
  • Amplifiers
  • Amplifiers forum
Answered

• INA213-Q1: Regarding Stability of Current Sense Amplifier

  

  Grace Abraham1

  Resolved

  Part Number: INA213-Q1 Hello, I would like to know whether the following Circuit will be stable or not ? In the datasheet I have seen recommendation of 1 nF maximum capacitive load with no sustained oscillation. We have a signal UC_SENS2_LVL , output…

  • Resolved

  • over 5 years ago
  • Amplifiers
  • Amplifiers forum

• INA213-Q1: INA213-Q1 Failure Mode

  

  Koji Hayashi92

  TI Thinks Resolved

  Part Number: INA213-Q1 Hi All, I think that there are various phenomena when it comes to failure mode, but is there any symptoms that the output voltage becomes a fixed value in that? Best Regards, Koji Hayashi.

  • over 6 years ago
  • Amplifiers
  • Amplifiers forum

• INA213-Q1: During reflow welding of SMT, if customer don't use N2, whether it is affected to INA213AQDCKRQ1?

  

  sherry yang

  TI Thinks Resolved

  Part Number: INA213-Q1 Other Parts Discussed in Thread: INA213 During reflow welding of SMT, if customer don't use N2, whether it is affected to INA213AQDCKRQ1?

  • over 5 years ago
  • Amplifiers
  • Amplifiers forum

• INA213-Q1: TRANSIENT - PULSES in the Input supply of the Amplifier_Is it damage the Opamp

  

  selva kumar7

  TI Thinks Resolved

  Part Number: INA213-Q1 Other Parts Discussed in Thread: INA213 , INA190 , INA186 Hi Team, We are going to use INA213-Q or INA213AQDCKRQ1 part in our design. We have transient pulses test case at SW_VIGN_FUEL supply. Is it affect your operational amplifier…

  • over 5 years ago
  • Amplifiers
  • Amplifiers forum

• INA213-Q1: Current Sense IC parameter query

  

  Brosnan Gomes

  TI Thinks Resolved

  Part Number: INA213-Q1 Other Parts Discussed in Thread: LMP8481-Q1 Hi, I am trying to implement a differential voltage to single ended voltage converter using INA213-Q1 current sense IC. Measuring the differential voltage across a resistor. My supply…

  • over 6 years ago
  • Amplifiers
  • Amplifiers forum

• INA213-Q1: Shifting input common mode

  

  Martin Steube-Henkel

  TI Thinks Resolved

  Part Number: INA213-Q1 Other Parts Discussed in Thread: INA213 , LM27762 Hey In the Setup with INA213 my input common mode range will violate the negative VCM with -0.8V. The datasheet mention -0.3V max. Any idea how to shift this into the safe operating…

  • over 6 years ago
  • Amplifiers
  • Amplifiers forum

Didn't find what you are looking for? Post a new question.