Part Number: INA234 Hi
I am using 4 INA234 in my design on the same i2c bus. cant get logical reads from shunt voltage, power and current register that will make sense with external power supply measurement.
for :
20mohm shunt register assembled on b…
Other Parts Discussed in Thread: INA2134 Now I used INA2134 as my input stage, But I want to change the Gain to 1.33, So I must change the INA2134 to another type, Now I want to use OPA1216, I do not know that the performance is ok?
Other Parts Discussed in Thread: INA2134 , INA2128 , INA128 , INA134 , DRV134 , INA137 Hello, I have a need to bring a signal into my circuit whilst preserving its fidelity as best as possible. It isn't audio, but it has the same sort of requirements as the…
Other Parts Discussed in Thread: INA2137 , INA137 , INA134 , INA2134 , TPS60403 , LM2664 Is it possible to use an INA134 or INA2134 (INA137/INA2137) with a single supply?
Either 5V, 12V, or 24V.
What would be the common mode and differential mode input voltage…
Other Parts Discussed in Thread: DRV632 , INA2134 Hi, 1st off my disclaimer, im not an analog guy im a microcontroller programmer... but im making a little project, bluetooth audio device, the module im using has its audio as differential outputs, i have…
Robert, I’m happy to say that the paper includes information for applications like yours. Here’s where to look.
Q1) TPA6132A2 can work very well to implement a pair of mono line drivers. See the schematic in section B.2 on page 11 of the…
Al,
The specification to which you are referring is input bias current which on a bipolar difference amplifiers such as the INA2143 can be as much as +/-50nA. Input bias current can be an issue in applications with resistance in series with the inputs…
