Search tips
Showing 22 results View by: Thread Post Sort by
    Answered

  • INA219EVM: Documentation for Rev B Version?

    Resolved
    Part Number: INA219EVM Other Parts Discussed in Thread: INA220EVM Hi all, I ordered the INA219EVM for testing: https://www.ti.com/tool/INA219EVM Unfortunately, the INA219EVM I received is the Rev B version. It is not the same PCB as what's pictured…
    • Resolved

  • RE: INA219EVM: EVM software does not find USB DIG Platform

    Hello Bob, As I never heard back from you, I presume you were able to get the EVM software to find the USB-Dig. As such I am closing this thread. However, if you still do need support, please reply below to reopen the thread below.

  • INA219EVM: Hello everyone i am using INA219 current sensor(ADA_Fruit kit) with FPGA. When i used single INA219 i get all readings correct but when i use more than one INA and read there data via I2C bus.The current of only first sensor is read while ...

    TI Thinks Resolved
    Part Number: INA219EVM Other Parts Discussed in Thread: INA219 Hello everyone i am using INA219 current sensor(ADA_Fruit kit) with FPGA. When i used single INA219 i get all readings correct but when i use more than one INA and read there data via I2C…
    • Answered

  • INA219EVM: INA219 EVM Not Functional

    Resolved
    Part Number: INA219EVM Other Parts Discussed in Thread: INA219 , Hi Sirs, We found the INA219 EVM is not functional since the 9V AC adapter was removed from the box (application note released on 5/18/2016). With application note's suggested jump configuration…
    • Resolved

  • RE: Using the INA219EVM

    Bharath, I looked through the hardware description of the INA219EVM user guide, and I re-read your question; do you have a power supply hooked up? You only mention SCL, SDA, and GND. The device will need a supply, and it will need to power the part…

  • INA231EVM: /INA219 EVM: equipped with A or B?

    TI Thinks Resolved
    Part Number: INA231EVM Other Parts Discussed in Thread: INA219EVM , INA231 , INA219 Team, -Can you please confirm with what IC variants the EVM boards are equipped with? on INA231EVM? on INA219EVM? -Package: I am not sure from the picture of INA219EVM…

  • RE: INA219: The INA219 Power registers reads zero at 50% rate while looping on monitor the bus voltage, the current, and the power measurement.

    Hi Shiang, I will attempt to recreate the issue with a INA219EVM and get back to you by tomorrow. Best, Mohamed
    • Answered

  • INA220EVM: How to read register value

    Resolved
    Part Number: INA220EVM Other Parts Discussed in Thread: INA219EVM Hello there, I have questions regarding INA220EVM. Please kindly advise. (1) Could you let me know how to read a register that is NOT listed in datasheet? I want to read the value…
    • Resolved

  • RE: wrong reading from bus i2c

    The code would be different for every microcontroller, so information about the INA219EVM probably would not help you. What do you actually read? Can you show oscilloscope traces of the two I²C lines?

  • RE: INA219: Communicating with INA219 over I2C

    Hi Tammy, Tammy Noergaard said: 1. Are there any sample device drivers from TI for using TI's INA219 over I2C? We don't have a driver specifically at the moment, but what kind of driver where you looking into? We do have a GUI platform that can communicate…

Didn't find what you are looking for? Post a new question.