Part Number: INA220EVM Other Parts Discussed in Thread: INA219EVM Hello there,
I have questions regarding INA220EVM. Please kindly advise.
(1) Could you let me know how to read a register that is NOT listed in datasheet? I want to read the value of F2h…
Part Number: INA220EVM This is for the current sensing forum which is not an option on the dropdown menu.
I have two INA220EVM modules and would like to use them simultaneously from the same PC host.
I have a previous post INA220EVM: USB Communication…
Part Number: INA220EVM Other Parts Discussed in Thread: INA220 I purchased an INA220EVM and am having exactly the problem described in the manual (SBOU079–July 2009 INA220 Evaluation Module) on page 14 but the suggested fixes are not working for me.…
We have used the INA220EVM tool to check
Max bus voltage 16V
Max Shunt voltage 0.04V
R shunt 0.0005 ohm
Max Possible Current 80A
Max Expected Current 27A
Min Current LSB 824u A/bit
Max Current LSB 6.593m A/bit
Enter LSB 1.3m A/bit
Part Number: INA220-Q1 Other Parts Discussed in Thread: INA226 , INA220EVM , TEST Hi team,
In the datasheet, we have only these following details:
« Iin+, Iin- Input bias current at IN+ and IN-« (Ta=25°C, active mode, Vin+ = 12V ; (Vin+ - Vin…
Thank you for using the TI E2E Forums.
Would you be able to clarify whenever the two devices which are experiencing the issue are permanently showing a different value for REG0x00 (after a reset operation/power up) or whenever this happens…
Other Parts Discussed in Thread: INA220EVM , INA220 Hi Everyone,
Now our customer has evaluated INA220 as inserted circuit and then they has confirmed the behavior when Rsns and ferrite beads will be opened and DC/DC will be off. We tried to confirm this…
I set up an INA220EVM in the default configuration but with Vbus connected to 12V. The bus voltage register contained 0x5DB2, which equates to 11.992V. This corresponds to the decimal value also reported by the EVM software.
There isn't anything special required in order to communicate with the VBus register. The register contents, once read, does need to be shifted in order to calculate the corresponding value represented by the register value. Notice that…