Part Number: INA228 Hello I have a INA228_EVM purchased for evaluation and along with it the SCB. After some initial difficulties I suspect the SCB is faulty. When plugged in to my PC there is a COM port that appears for a few seconds before disappearing…
Part Number: INA228 Hey TI Forums, I purchased the INA228EVM Current-Sense IC Module to use in a project of mine but I decided to test it before with a very simple resistor circuit:
This circuit is realised in real life as shown in the image below…
Hi Austin, Yes, the Sensor Control Board (SCB) and INA237 EVM can interface with an online plotting and data logging tool. Please see the links below for more information. The EVM user manual is very informative as well. https://www.ti.com/tool/INA228_237_238EVM…
We are using an electronic load to simulate power going across the shunt resistor. On the INA238 development kit ( https://www.ti.com/tool/INA228_237_238EVM#tech-docs), we are connecting the electronic load to IN- test hook and pulling a small load of…
Hi Anuj,
My only question about your schematic has to do with the shunt resistors. You seem to have 2 0.5mOhm resistors in parallel, which would yield a smaller total resistance and you mentioned that your shunt was 0.5mOhm. Was this intentional? Having…
Hello,
Thank you for using the TI forum. We do not have a device model to simulate communication, but we do have EVMs available if you want a device to practice with. Those can be found here: https://www.ti.com/tool/INA228_237_238EVM
Also, we have…
Hey Michael,
Sorry, I didn't realize that was an internal link.... Here is the relevant info from that thread:
Before trying to associate the driver, first try this:
Connect the EVM to the SCB controller
Plug the SCB/EVM into the computer
…
