Part Number: INA240EVM Other Parts Discussed in Thread: INA240 , Excuse this somewhat rooky question. I am a retired systems engineer who now develops electronic 'features' at our local model town. Some years ago, I developed a model train controller…
Part Number: INA240EVM Other Parts Discussed in Thread: INA240 , TINA-TI Hi Team,
The datasheet of INA240 states the maximum load capacitance is 1nF. However, a customer wants to add a low pass filter by connecting a capacitor on the output. Based on…
Part Number: INA240EVM
Hello,
i recently ordered the INA240EVM for my customer and he wanted to know if this board could handle a current of 100A? this isn't specified in the User's Guide as it is the case with the max voltage the board can handle…
Hello Ruchit,
Thank you for your interest in the INA240EVM. Presuming you operate at room temperature, the device has a margin of 100 ᵒC under which it is within recommended operating conditions (-40ᵒC to 125ᵒC). The current will be limited by the narrowest…
Part Number: INA240EVM I looked through the user's manual but did not see it specified what the footprint of R3, the shunt resistor, is so that I can order some resistors from my distributor with my order of the eval modules. Thanks.
Hi Darryl, We only deal with devices and products sold by Texas Instruments. I'm unfamiliar with the board above, our INA240 EVMs ( https://www.ti.com/tool/INA240EVM ) you'll see have the REF pins open to either be connected to GND ( for unidirectional…
Carolus,
Yes, 5 failed pieces have 14K marking.
I have tried devices on a few boards. However, I command the INA240EVM in order to try on it next week.
BP101,
The EMI testing of the INA240EVM was put on hold due to unforeseen circumstances, but resumed earlier this week. I hope to have something to share shortly!
Matthew
Thank you for your intersting reply,
1) According to the Datasheet, i think that the UCC device https://www.ti.com/tool/UCC27423-4-5-Q1EVM is fine to use with the Launchpad F28379D.
The INA240 : https://www.ti.com/tool/INA240EVM#2 , https…
