Part Number: INA253-Q1 Other Parts Discussed in Thread: INA240 Tool/software: I plan to use INA253A3-Q1 for current sensing based on the orginal current requirement of RMS 3A, but recently we got a requirement change, the RMS current will be max. 0.8A…
Part Number: INA253-Q1 Other Parts Discussed in Thread: INA253 Tool/software: We want to use INA253 for current sensing, could you pls support to calculate if it can meet our accuracy requirement? thank you.
Irms : 3.0A
ADC resolution : 12 bit
Vref_ADC…
Part Number: INA253-Q1 Tool/software:
For our HW design, we ’ d like to use INA253A3-Q1 for current sensing feedback on dither valve control. And for this current sensing circuit block, ASIL C is needed.
After FMEDA calculation based on HW,…
Part Number: INA253-Q1 Other Parts Discussed in Thread: INA253EVM Hello,
there are some problems with INA253-Q1 (100 mV/A module): i linked the 5 V power supply to VS and GND connectors, the current generator is linked to through a breadboard and a resistance…
Part Number: INA241B-Q1 Other Parts Discussed in Thread: INA241B , INA280-Q1 , INA281-Q1 , INA253-Q1 Tool/software: Dear Support Team The product page for the INA241B-Q1 lists a gain option of 500V/V, but this is not mentioned in the datasheet. Is there an…
Part Number: INA253-Q1 Other Parts Discussed in Thread: INA253 , INA240 In my application i am using 24V and 80mA solenoids and 6V and 1.8A solenoid .so can we use INA253-Q1 IC?if no, then can u suggest any IC which have integrated shunt or external shunt…
Part Number: INA253-Q1 Other Parts Discussed in Thread: INA253 , AMC3302 , AMC3301 Hello ,
I am designing a current measurement circuit and I want to use one of TI precision current sense amplifiers. My problem is that I need the device to tolerate high…
Part Number: INA253-Q1 Other Parts Discussed in Thread: INA253 , INA240 I have the application of the solenoid control circuit and the circuit can able to tell the status of the solenoid(open/close),is there any way to find the slow movement of the solenoid…
Part Number: LM1084 Other Parts Discussed in Thread: INA253-Q1 , , INA745B , TPS7A47 , TPS7A85A , TPS7A84A , TPS7A57 , TPS7A54 , TPS7A52 , TPS7A53 Tool/software: I am reaching out regarding a design challenge in my application and would appreciate your assistance…
Part Number: INA253 Other Parts Discussed in Thread: INA240
Hi
INA253 output signal is heavily distorted on brushed DC motor drive bridge circuitry. According to datasheet this was not expected because of high CMRR ratio. The INA253 is connected to measure…
