The TI E2E™ design support forums will undergo maintenance from July 11 to July 13. If you need design support during this time, open a new support request with our customer support center.
Part Number: INA285 Tool/software: Part number INA285AIDGKR (Gain 1000 V/V) is listed as no longer manufactured on distributor websites. Ias this true? Will you get manufacturing this part?
Part Number: INA285 Other Parts Discussed in Thread: INA185 , INA190 , INA282 I'm using INA285 for sensing current in the range of 1uA. The chip is supplied with 3.3V. Current will be sensed on the high side of an additional supply. If that additional supply…
Part Number: INA285 Other Parts Discussed in Thread: THS4541 Dears,
Below is my customer design concern.
He applied INA285 in each RJ45 data pair.
As below picture, he use INA285 on pin 1, 3, 5, and 7.
And for these pins, they use below circuit on it…
Grady,
For an analog device, the only device available with a gain of 1,000 is the INA285, and it can handle Vcm voltages up to 80V.
If the customer could use a device with a lower gain, the options open up a little bit with the INA280, 281, 290, 293…
Part Number: INA283-Q1 Other Parts Discussed in Thread: INA283 , INA285 , TINA-TI , TMCS1100 , TMCS1101 , INA226 , INA228 , OPA2192 Hello TI team
1.There is a project that require measure the current but the common voltage is between 100VDC to 200VDC bidirectional…
BP101 said: So the full wave DC supply (above post) introduces AC ripple
Might a high-value capacitor be (usually) required to create a, "DC supply?" No cap is in evidence w/in poster's hand-drawing. (below)
The output at the diode junction…
Other Parts Discussed in Thread: INA282 , INA285 , INA212 , INA193 Dear all,
I need your assistant for choosing the correct high side current sensing amplifier.
Specification:
1) need to sense the current in both the directions ( +20 mA to -20mA)
2) current…
Dear Pete,
Thanks for your reply. I changed my specification and I need your assistant for choosing the correct high side current sensing amplifier.
Specification:
1) need to sense the current in both the directions ( +20 mA to -20mA)
2) current sensing…
Other Parts Discussed in Thread: TINA-TI Update of TINA9-TI Spice Model Libraries and Example Circuits
This note describes the step-by-step process for updating the TINA9-TI Spice Macro Libraries and Example circuits. The update is initiated by selecting…
