Part Number: INA310A-Q1
Tool/software:
Hi expert,
Have below INA310A1 application question, which need your help.
1. What is the maximum carrying capacity of OUT?
2. pls help review the sch as below
3. we found output not stable when the input as below…
Part Number: INA310A-Q1 Other Parts Discussed in Thread: INA310A Tool/software: Dear Texas Instruments Support Team,
I am currently working on a project that involves the use of the INA310A current sense amplifiers, and I have a few of specific questions…
Part Number: INA310A-Q1 Other Parts Discussed in Thread: INA301 Tool/software: Dear all,
I set up the simulation for bidirectional current measurement as per datasheet, figure 7-6. However, the simulation does not work. It works fine, however, when only…
Part Number: INA310A-Q1 Other Parts Discussed in Thread: INA190 , INA228 , INA238
Tool/software:
We need to monitor the current through a Shunt resistance of 40mOhm.
For the diagnostic purpose, we are planning to keep 1K ohm resistor in series between the…
Part Number: INA310A-Q1 Good Morning.
I'm using INA310A3 for mesuring current between 50mA and 2A.
By measuring with a scope, the INA310A3 ouput voltage, I have a 7% error (264mV for a real current through the shunt of 120mA, checked with a serial…
Part Number: INA310A-Q1 Hi,
We are using INA310A3-Q1 for one of our application. I would like to know whether the trip voltage (close to 0.6V) can be set only with Vsense & gain without the use of divider resistors. In datasheet, I couldn't see the option…
Hi Jeff,
We do not have any current sensors with a bandwidth greater than 1.3MHz. The following link shows other options for CSAs; each of these is automotive grade and has a bandwidth of 1.3MHz. The INA310A/B-Q1, INA281-Q1, and INA293-Q1.
https://www…