Part Number: INA310B-Q1 Other Parts Discussed in Thread: INA293 Tool/software: I would like to set up input filter on the INA310B1QDGKRQ1, what is the gain error factor for this?
Part Number: INA310B-Q1 Other Parts Discussed in Thread: TINA-TI Hello,
where can I get a Pspice or LTspice simulation model for the "INA310B-Q1"?
Thank you in advance.
Part Number: INA202 Other Parts Discussed in Thread: INA310B Tool/software: Recently, we have a high number of digital output modules failing during a functional test at high temperatures.
The cause was determined to be a faulty function of the INA202…
Part Number: INA200 Other Parts Discussed in Thread: INA310B Hi team,
Customer is now considering the shunt option1 case in the following circuit, supply = 48V and Vs =12V.
Is there any problem if Vs is set to 0V with FET switched off though 48V supply…
Part Number: INA310A Other Parts Discussed in Thread: INA310B , INA301 , INA201 , INA381 , INA293 Dear Sirs,
do you have a TINA model (or PSPICE) model for the INA310A and INA310B?
Many thanks and kind regards.
Joern Ihlenburg
Hello Mario,
Thank you for your post.
The only way to successfully float the inputs to the device are to also float the supply. Even in this scenario, you need to measure the input voltage with respect to the GND pin of the device to ensure it is…
Part Number: INA201 Other Parts Discussed in Thread: INA281 , INA310B Hello team,
I received a question from the customer. This is a rudimentary question, but for example, in Figure 26, there is a maximum potential difference of 75V (Load supply 80V…
Hello Vasu,
The datasheet goes through multiple scenarios when connecting to the A1 to A2 and
Vasu Poojary said: Will adding this circuit have any impact of normal current monitoring at A2 out which will be connected to ADC ?
This depends on the…
