Part Number: INA317 Tool/software: Hi Team
do we have any low cost version/roadmap? I just check the roadmap. it's only cost sensitive solution.
customer project plan to RTM 2Q25.
BRs
Brian
Part Number: INA317 Tool/software: Hi,
I have an application that involves amplifying a signal coming from a wheatstone bridge. I'm using the INA317, for differential amplification.
The supposed gain is 1+(100/1.43) = 70.9 =G I'm having problems with…
Part Number: INA317 Other Parts Discussed in Thread: INA326 Hi,
We are using INA317 in our design in which we are facing some problem.
We are giving 0.549 and 0.428 at the input and the gain is set to 10. So in this case the output should be 1.21V…
Part Number: INA317 Hi Team,
For INA317IDGKT is having dual supply range is +/- 2.75 V is the max range as per datasheet power supply recommendations.
But I have found one board with INA317 IDGKT with +/- 5V , it means Positive supply 5V (at Pin 7…
Part Number: INA317 Hello TI
We are designing the current sense circuit using INA317 for high side sensing to measure current for 3A, 10 A and between 3A to 10 A . The question is, Can we design current sense circuit in which load current at the input…
Part Number: INA317 Other Parts Discussed in Thread: INA333 Tool/software: Hi Team
do we have any recommendation OP for load cell sensor? low cost or special application
BRs
Brian
Part Number: INA317 Hi team,
If the INA317 power supply is +2.5V and -2.5V, can the input signal exceed (V+)+ 0.3V?
The DS says that if the input signal voltage exceeds the power supplies by more than 0.3 V, the input signal current must be limited…
Part Number: INA317 Other Parts Discussed in Thread: LM7705 , INA190 , INA191 Hello E2E Expert,
We are looking for INA317 application to be used for low side current sense amplifier (microvolts drop across the low side shunt to be amplified )
One…
Part Number: INA317 Other Parts Discussed in Thread: OPA317 Hello,
For the moment, I am debugging the board with INA 317 . I found the INA317 output has some oscillation with 80KHz/80mVpp, see attached:
Test condition is: short VO- and VO+ and connect…
Hi user4718634 ,
I simulated your floating "capacitor" measurement using INA317. Please let us know if this is what you asking.
1.5V represents the floating voltage. Vcap represents the "capacitor" that you want to measure. 100kOhm represents the…
