Part Number: INA4235 Other Parts Discussed in Thread: SYSCONFIG , Tool/software: Could you please give the information of linux driver for INA4235AIYBJR current sensor.
Part Number: INA4235 Other Parts Discussed in Thread: INA226 , TIDA-00313
Tool/software:
Hello,
I need a way to measure negative common mode voltage of -15V using the INA4235 or the INA780x.
I can't found nothing, just about INA226 .
Thanks.
Hey Kevin,
I agree with Clemens, just make sure you have the sensing input traces relatively matched. Here is a link to a video about routing that may help: https://www.ti.com/video/6076326896001
Also, as an FYI in case you are interested, we recently…
Part Number: INA3221 Other Parts Discussed in Thread: INA4230 , INA4235 Tool/software: I'd like to monitor a 24V line.
Vbus is specified 0 - 26V. I would normally give some margin of error on the 26V. Is there some margin built in to the specs of the…
Part Number: INA3221 Other Parts Discussed in Thread: SN74LV4052A , TCA9546A , INA4230 , INA4235 Tool/software: I am working with adding INA3221 in my schematic. I am wondering about the address pin. There is only one address pin Ao. The pin Ao can be attached…
Part Number: INA3221 Other Parts Discussed in Thread: INA4230 , INA4235 Tool/software: In our implementation, referring to Figure 26 of INA3221.pdf, March, 2016 edition, “INA3221 with Input Filtering”:
The value of Rfilter is 100 ohms, 0…
Hey Dan,
Since you have 15 INA237’s, you don’t have a spare address to move the INA on 0x47 to another address. Because of this, I have 3 suggestions for you:
If the DAC is reading and writing just fine on 0x47, then you could put the DAC…
