Search tips
Showing 27 results View by: Thread Post Sort by

  • INA500: ina500

    TI Thinks Resolved
    Part Number: INA500 Other Parts Discussed in Thread: AMC3311 Tool/software: Hi, Is that ok to connect HLDO out to supply the INA500A? instead of connecting dedicated VCC to that. Please find the below image for more information. Requesting to insight…
    • Answered

  • INA500: INA500 input clamping voltage?

    Resolved
    Part Number: INA500 Tool/software: the INA500 data sheet specifies 10mA max input current but no voltage causing current flow. Figure 7-7 in Chapter 7.3.5 "Electrical Overstress" shows bidirectional clamping diodes on the inputs but the data sheet doesn…
    • Resolved
    • Answered

  • INA500: Could INA500 for LVDS or MIPI applications?

    Resolved
    Part Number: INA500 Tool/software: Hi, I recently looking for information on which can apply with signal amp. The related specification (Spec) is briefly described as follows: 1.signal amplitude voltage: 0.8V amplifies to 2V. 2.Frequency (bandwidth…
    • Resolved

  • INA500: AMC3311-Q1 and INA500A

    TI Thinks Resolved
    Part Number: INA500 Other Parts Discussed in Thread: INA500 Tool/software: Hi, In differential to single ended amplifier I am getting 25usec of delay between inpu and output. could you please tell is it advisible to use the same?. If not please suggest…
    • Answered

  • INA500: INA500C Max Input Voltage

    Resolved
    Part Number: INA500 Other Parts Discussed in Thread: TINA-TI Tool/software: Hello I am proposing to use INA500C operating from a 3.3 V PS, and to transform a +/- 6V to 0-3.3 V using This Difference Amp and using a Ref of 1.65 V Would there be…
    • Resolved
    • Answered

  • INA500: INA500B differential impedance tolerance and drift over temperature

    Resolved
    Part Number: INA500 Hi, Regarding INA500B, the datasheet specifies typical differential input impedance 2.88MOhm, and section 7.3.1 mentions -+15% tolerance of all of the resistors. We are considering calibrating our analog errors at room temperature…
    • Resolved

  • INA500: Alternate use of INA500 for interfacing low speed digital input (~120Hz)

    Part Number: INA500 Tool/software: Hello E2E Community, We are evaluating the use INA500 to interface with two types of sensor inputs: Single ended 0-3.3V analog voltage input from temperature sensor Single ended 0-5V digital square wave…

  • INA500: PSPICE lib-file

    TI Thinks Resolved
    Part Number: INA500 Other Parts Discussed in Thread: TINA-TI Tool/software: I just want to know if there are any update on this failing INA500A lib-file? Or at least a schedule for when it will be fixed.

  • INA500: PSpice Model

    Part Number: INA500 Other Parts Discussed in Thread: TINA-TI Tool/software: Hi, I tried a simple simulation on the PSpice for TI for INA500A and INA500B. It seems G=2 for INA500A instead of G=1. On the other hand, INA500B works well as G=0.5 as…
    • Answered

  • INA500: INA500C input common mode voltage when supply is 0V

    Resolved
    Part Number: INA500 Other Parts Discussed in Thread: TINA-TI Tool/software: Hi, We are planing to use INA500C to read battery cell voltages. It says input common mode voltage is 5*SupplyVoltage which is 5V for our application thus a 0V to 25V input…
    • Resolved

Didn't find what you are looking for? Post a new question.