Part Number: INA901-SP
The last thread on Single Event Effects testing for this part stated that the SEE report would be available in 4Q2023. We're now near the end of 1Q2024, when should we expect the report to be made available?
Part Number: INA901-SP Is it necessary to add a voltage buffer to the output to input into an ADC? The output amplifier has an output of almost 10mA (Figure 7). It appears that a buffer is not needed. Is that correct? Is there a reason to add a voltage…
Part Number: INA901-SP I have an application that will input more than 5mA into the IN+ and IN- pins of the INA901-SP. Do I need to add external resistors to decrease the input current below the absolute max stated in the datasheet? Due to offset errors…
Part Number: INA901-SP If the maximum input on sense pin is 5mA do I need to add external resistors in series with the internal 5k ohm resistors to limit the input current to the sense pins to below 5mA? If I do add external resistors I will try to
Part Number: INA901-SP Other Parts Discussed in Thread: INA240-SEP Hello,
Is this part still recommended for new designs?
Are there alternate parts I should be looking at?
I’m a bit confused with the ordering part numbers and packaging.
Sounds like…
Part Number: INA901-SP I am running an analysis on a board using some your company's discrete components and need more details that are unavailable in the datasheets. The part number is INA901-SP, and can you tell me if the metal lid of this item is floating…
Part Number: INA901-SP Hello,
There are a few posts about the SEE test report for the INA901-SP. I am checking in to see if this report is finalized yet?
Thanks,
Part Number: INA901-SP I am trying to prepare for a series of RAD tests on this component. I have a basic circuit on a PCB built to allow the device to run at very simple, static voltages & currents based on MIL-STD883 . I have pins 3 & 4 shorted…
Part Number: INA901-SP I am needing to perform my own Heavy Ion Single Event Effects testing on the 5962L1821001VXC version of this component. Depending on the facility I am able to be scheduled into, and the energies available at that facility, I may…