Part Number: ISO7242M Other Parts Discussed in Thread: ISO6742 Hi Team,
Customer want a isolation device use in such a system. Thay want use in a 5Mhz SPI net with all miso connect directly.
So I recommended ISO7242M to him. Customer says he want the…
Part Number: ISO7241M Other Parts Discussed in Thread: ISO7231M Hi!
In your data sheet "ISO724x High-Speed, Quad-Channel Digital Isolators",
there is "The signal input pins are 5-V tolerant regardless of the voltage supply level that is used…
Part Number: ISO7242M Hello, the support team.
I have a question about Input signal level of ISO72xx series.
[Question] What tolerance is there for overshoot level and undershoot level of the input signal. (Example: ** V for ** μs etc.) Of course, I…
Part Number: LP-AM243 Other Parts Discussed in Thread: AM4376 , ISO7242M I am trying to evaluate the Intra Drive Communication Using 8b-10b Line Code With Programmable Real Time Unit - Application Note. Will the source code files be made available? That…
Hi Amod,
Welcome to TI E2E Forum! Thanks for reaching out and for your interest in TI digital isolators.
ISO7242M is a 150Mbps rated device while ISO7242C is a 25Mbps device. This is the key difference between the two parts and due to the difference in…
Hi TTD,
Thanks for highlighting ISO7242A anomaly. Yes, this is the same anomaly that customer is seeing in their waveform. When a <1µs negative pulse is applied then output gets locked to a LOW state and DC refresh doesn't change the output upto the next…
Quickly find solutions to common questions about digital isolator devices by clicking this link. This FAQ answers the most common questions asked about these devices …… ……… …
FAQ: Isolation >> Digital Isol…
