Hi Akash,
I've gotten your model via one of your colleagues and have been able to reproduce the issue. Even in a few of my own test scripts, I see reasonable output tensors from your model, but within infer_pipe.py, I see zero good detections. Indeed…
Hi Ramakrishna,
Thanks for the additional information.
I would recommend you stay with the SN754410 based on your requirements. You are already familiar with the device and its operation.
To follow up on your comments:
The L293D is a lower current…
It is TI's fork of onnxruntime with the ability to offload to TIDL in the backend. It is a package that is installed when you run the setup of edgeai-tidl-tools or edgeai-benchmark
https://github.com/TexasInstruments/edgeai-tidl-tools/blob/master/setup…
Part Number: MSP430F447 Other Parts Discussed in Thread: L293 Hi
I am driving L293 Ic from Microcontroller.
while programming in Jtag i mean when my board is power on while flashing the code all the port pin connected to motor driver is high and makes…
Part Number: DRV8873SEVM Other Parts Discussed in Thread: DRV8873 , L293 , L293D We bought the evaluation module. Our software engineer used it in my absence and said it worked only once.
I bought another one and together we wired it up carefully. We…
Other Parts Discussed in Thread: L293D , L293 I have got a MB PM35S-048 motor and I want to build a Knetic Energy Recovery System. The motor is drived in printers by L293 or L293D, but the driver only control the direction of rotation, but when the motor…
Tony Philipsson said: ... this IC is not a good one for speed control ..
My concern is, is the motor used a good one for speed control?
Some (DC) motors just deliver torque and produce back-EMF. It rotational speed is the result the balance between…
Part Number: TIDA-00365 Other Parts Discussed in Thread: CONTROLSUITE , CSD19534Q5A , LM5109B Can this be used to amplify 12 V PWM signals to 75 V PWM signals?
This is the PWM microcontroller board ( https://robokits.co.in/control-boards/rhino-robot…
Sorry for the confusion. I mentioned the 4.5V minimum voltage in reference to the L293 that I had originally intended to use in this circuit, but the L293 requires a minimum of 4.5V. So, it won't work for me because I intend to use a 3V operating voltage…
I have the F28335 experimenters kit and I was using CCSv3.3 when I ran into the error in "Failed Software Reset". After reading the various related posts in this thread and others, I thought I would briefly explain my experience as it has not been described…
