Part Number: LDO-PARAL-DESG-EVM Tool/software: we are using TPS72301DBVT as -5V to -3.3V converter. but we are getting Output ripple more than 100mV. We used all the Input, output capacitors according to Datasheet.
am not able to find the reason.
…
Part Number: LDO-PARAL-DESG-EVM Other Parts Discussed in Thread: TPS7B4253-Q1 Tool/software: V62/10611-01XE I'm trying to figure out if this part is qualified to AEC-Q200 or any other mil specs I'm trying to figure out if this part is qualified to AEC…
Part Number: TPS712 Hi, TI STAFF,
1). Looking for the missing information of those NOT POPULATED parts in BOM docs.
TPS712xxEVM User's Guide: ( https://www.ti.com/lit/ug/sbvu010/sbvu010.pdf?ts=1707263307112&ref_url=https%253A%252F%252Fwww.ti.com…
Part Number: DP83867ERGZ-R-EVM Other Parts Discussed in Thread: TPS74701 , Hi Team,
I am checking on behalf of my customer. Pls help to advise for below enquiry, thanks in advance.
From the DP83867ERGZ-R-EVM schematic, it uses two different LDOs …
Part Number: TDA4VM Hi Expert,
How to control PMIC-B LDO1 output from 3.3V(bypass mode) to 1.8V(LDO mode)?
We know that the voltage switch is for switch SD voltage work status from initialization to normal work status.
According to below diagram…
Hi,
Do you have any recommendations on an inverting LDO that has EVM with 24V or 5V input & -5V output? It seems the TPS67 series doesn't has an EVM anymore.
Sebestian
Part Number: OPT8241-CDK-EVM Hi,
I have yet another question (sorry).
Is there any specific reason, why the low ripple ldo's of the TPS659122 remain unused? Shouldn't they be a better choice for e.g. VCC_LDO_1V8?
Thx,
Bernd
Other Parts Discussed in Thread: TPS659037 Hi,
The TPS659037 user guide recommends that each LDO input pin should have a 2.2-µF capacitor connected to the input supply. The capacitor should be placed close to the IC pin. However, in the AM572x GPEVM…
Other Parts Discussed in Thread: PMP8372 , TPS84250 , TPS84259 Hello,
i'm looking for an EVM with a DC input that must be capable to deliver ±12Vdc with PSRR ~100dB in 0-3Khz bandwidth.
I've seen PMP8372 module and it would be perfect but i've seen…
Other Parts Discussed in Thread: TPS65070 , AM1808 , OMAP-L138 Hi,
is there a reason why both, logic PD and SPECTRUM DIGITAL power DDR2 Memory and controller from a LDO?
Is it possible to use a DCDC from the TPS65070 instead?
Thanks,
Thomas…
