Part Number: LM10 Hello Team, This article shows how to setup a short circuit detection circuit using LM10. But our use case is little different and we really appreciate your support. We need to power a daughter PCB with 12V from our back plane PCB. The power…
Part Number: LM10 I am currently using LM10CWMX/NOPB and I would like to obtain these screened for a lower temperature rating down to -40C. They are currently spec’d at from 0C to+70C. I would like to be able to operate this down to -40C. We have been…
Part Number: LM10 I have a similar question about the reference pins. I am using the LM10CN/NOPB as a unity gain buffer amplifier between a high-impedance output sensor and our scope and lab DA system, which have an identical input impedance to our sensor…
The bandwidth is not an issue for us in this case. We were going to use an LM10 originally and it works fine. I think the TLV9052 looks like a good alternative to the TLV9002. I'll try sourcing that one! Thank you so much for your help!
Part Number: LM10 Other Parts Discussed in Thread: TLV313 ,
Hi team,
My customer noticed that lm10 has two more pin functions than tlv313, namely pin8: feedback terminal of reference; Pin1: output terminal of reference, how to use these two pins? What…
When applying a voltage to a board with capacitors, the voltage will rise slowly. When you have a board with a short, the voltage will not rise. You will need to detect this difference.
That application note uses the LM10 because it does not need many…
Part Number: LM10 Other Parts Discussed in Thread: OPA4228 LM1036 can't find in Ti
1.Is the device still in production or has changed its name?
2.Is there an upgraded version of this material
Other Parts Discussed in Thread: LM1558 , LM10 , INA827 , LM358 , LMC7111 , LM741 , LPV321-N , LPV321 , OPA364 I want to create a simulation in TINA with LM10, LT1101, LM1558 in the design (existing design in a current product). However, none of these are in TINA…
Part Number: TLV9052 Other Parts Discussed in Thread: LM10 , TLV9002 , TINA-TI
Hello,
I have built a very simple differential amplifier with the TLV9052. The inputs are 220K Ohm and the two feedback resistors are 470k ohm. The inputs connect to two metal…