Part Number: LM117HVQML Tool/software: Please advise on ① and ② below.
① Regarding the ripple rejection rate, the "Ripple Rejection" chart shows that it is 10dB at 1MHz (max), but what happens when it is between 1MHz and 400MHz?
Will it no longer…
Part Number: LM117HVQML Tool/software: Thank you for your help.
If the input frequency is between 1MHz and 400MHz, is it possible that the PSRR will fall below 10dB?
If it falls below 10dB, how far will it fall?
Also, the higher the frequency…
Part Number: LM117HVQML Other Parts Discussed in Thread: LM117 , Tool/software: I have 28V (nominal) input to the LM117, and the output is adjusted to 16V. Please advise on the following:
1. If 1Vrms (frequency 50kHz to 400MHz) is input on top of the…
Part Number: LM117QML-SP Other Parts Discussed in Thread: LM117HVQML-SP , , LM317 Tool/software: Hello, I wanted to know if there is any Spice model for the LM117QML-SP or the LM117HVQML-SP!
Thanks!
Hello Mike,
The INA901-SP is certified to class V of the MIL-PRF-38535, therefore the following thread's answer will also apply to the INA901-SP:
https://e2e.ti.com/support/amplifiers-group/amplifiers/f/amplifiers-forum/1620563/lm117hvqml-vibration…
Hey Patrick,
We do not have a rad tolerant LDO that meets that specification, but we do have a rad hard: https://www.ti.com/product/LM117HVQML-SP
The same issue is true of the GaN driver: https://www.ti.com/product/TPS7H6003-SP
I do not have a rad…
Hello Gabriel,
The LM117HVKSTL/883 and LM117HVK/883 will be functionally the same. They are both in the TO-3 package and have a 1.5 A current limit.
The LM117HVKSTL/883 is covered by the LM117HV datasheet while the LM117HVK/883 is covered by the…
Part Number: LM117HVQML-SP
Hi, I am trying to understand the Delta and Post Radiation Data, in particular for Vref, for worst case tolerances of the output voltage.
The orderable device that we will be using is 5962R0722962VZA.
For the post radiation…
Schematic 400W AEW.pdf
Output Voltage at PFC output is 272 V (RMS) you can see the output waveform in below image
The input voltage is 115 VAC Three-phase waveform is given below.
I also checked after disconnecting the LLC stage and by applying…
