Search tips
Showing 26 results View by: Thread Post Sort by
    Answered

  • LM139-SP: Negative input voltage and protection

    Resolved
    Part Number: LM139-SP Other Parts Discussed in Thread: LM139 , Hi, I am using this part for a space grade design. On both the TI datasheet and on the DLA SMD 5962-96738 datasheet I see this footnote about the maximum current tolerable in case the input voltage…
    • Resolved

  • LM139-SP: input negative voltage

    TI Thinks Resolved
    Part Number: LM139-SP Other Parts Discussed in Thread: LM139 , LM139A , , LM339 Dear Sir, my customer is considering about negative input voltage. when negative voltage is applied to the LM139 input terminal during 200us @-1.2V as below picture. questions…

  • RE: LM139AQML-SP: LM139AQML-SP vs LM139-SP

    Hi Christian, Thanks for confirming! I found as well the information in the datasheet SNOSAH8G at page 20 (Packaging option). It is as well listed in the Die & wafer - TI.COM page: http://www.ti.com/die-wafer-services/products.html For LM139/LM139A…

  • LM139AQML-SP: LM124/LM139 "die" version: difference between "Tested die” vs “known good die” vs "die sale"?

    TI Thinks Resolved
    Part Number: LM139AQML-SP Other Parts Discussed in Thread: LM124 , LM139 , LM139-SP Team, About the LM124 die / LM139 die devices listed in the below link: http://www.ti.com/die-wafer-services/products.html#p1498=Catalog;HiRel%20Enhanced%20Product;High%20Temp;Military;Space&sort…

  • LM119QML-SP: Use Zener on V+ supply input

    TI Thinks Resolved
    Part Number: LM119QML-SP Other Parts Discussed in Thread: LM139-SP Customer would like to use LM119-SP but spec indicates that the positive power supply input should not be more than 16V above ground pin voltage. In their case, they have a 23.5V power…

  • LM139AQML: where the RGA testing was performed for LM139 QML and LM139QML-SP

    TI Thinks Resolved
    Part Number: LM139AQML Other Parts Discussed in Thread: LM139 Dear All let me know where the RGA testing was performed for LM139 QML and LM139QML-SP thank you regards Michel
    • Answered

  • RE: LM139-MIL: Radiation performance

    Resolved
    Hello Francisco, 7700801CA is actually a LM139JB, belonging to the LM139-MIL family. These are QML Class Q (MIL-STD-883 Rev B), which is not Rad-hard. This is a native TI Military device (pre National Acquisition). So there would be no Rad reports for…
    • Answered

  • Radiation data | LM139-SP

    Resolved
    Other Parts Discussed in Thread: LM139-SP , LM139 Dear Sir/Madam, I would like to find out the radiation data for LM139-SP covers only TID40kRad/sec. Any reason why the Single Event Latch-up data was not reflected on the datasheet? Hope you could clear…
    • Resolved

  • TLV1704-SEP: Comparator or Opamp with low Vol performances

    TI Thinks Resolved
    Part Number: TLV1704-SEP Other Parts Discussed in Thread: LM139 , TLV1704 , LM139-SP , LM139AQML , , TLV7021 , TLV9024 , LM339LV Hello I was looking for a comparator or operational amplifier to control a NPN base transistor (to be used as a ON/OFF switch) Need…
    • Answered

  • TPS50601-SP: Questions about EN-pin & PWRGD-pin

    Resolved
    Part Number: TPS50601-SP Other Parts Discussed in Thread: LM139-SP , Hi team Customer has several questions about EN-pin. 1. What is the state of EN-pin during VIN = PVIN = 0V? 2. Can the EN pin be controlled by connecting the outputs of the logic IC if…
    • Resolved

Didn't find what you are looking for? Post a new question.