Part Number: LM158-N
The output and input of the test are relatively stable at normal temperature, but in the high temperature test, the temperature remains at 60℃, the input is stable, but the output fluctuation gap is relatively large. Please help…
Part Number: LM111 Other Parts Discussed in Thread: LM158-N Tool/software: Hi Experts,
Can you share the Junction to Ambient value for PN JM38510/10304BPA? The datasheet shows blank.
Thanks and Regards,
Marvin
The LM158J is a different part number, LM158-N, which is the LM158 that was acquired from National Semiconductor.
The LM158JGB is the same as the 5962-8771001PA, which is described not by the datasheet but by the SMD. If you are not using the SMD, then…
Part Number: LM358 Other Parts Discussed in Thread: LM158-N , , , LM158 Hello,
After the part of LM358MX/NOPB is uncovered, it is found that LM1580 is printed on the die.
Pls help to checck the difference from part number and die marking.
Thank…
Hello Ronald,
I will check your suggestion_ try adding a resistor from pin 7 to ground, 10k or less.
But it is an old board with PTH part, we will not modify it anymore from HW side.
Someone recommend LM358N nopb below, what's your idea? Can we…
Other Parts Discussed in Thread: LM392-N , LM193-N , LM158-N , LM158QML , LM158 National Semiconductor LM192H/883B Aerospace Grade Dual Low Power OpAmp not available through TI. Is there a good replacement for this part from TI?
Part Number: LM258 Other Parts Discussed in Thread: LM158-N , OPA2170 , TL062 , TLV2170 All,
I will try to explain as clear as possible:
I created a PCB where a microcontroller will read 2 analog inputs. For the analog inputs I use the LM258 as…
