Part Number: LM25180-Q1 Other Parts Discussed in Thread: LM25180 , LM5180EVM-S05 Hi TI Team,
I am using the LM25180-Q1 in my design, I have tried multiple configurations using the CALC tool and also Webench in order to achieve the active current which…
Part Number: LM25180-Q1 Hi,
Customers ask questions.
The red rectangular circuit is the Secondary Flyback output.
However, the physical location is in the input.
The current circuit has a 6.7V output.
The customer would like to ask if the feedback Ref…
Part Number: LM25180-Q1 The results of calculations and SIM results do not match. Please let me know some possible causes.
The condition of assumption is here.
・Vin=14V
・Vout=35V
・Nps=0.5 (Np=1, Ns=2)
・Vf=0.7V
・Rset=12.1kΩ
・Vref=1.21V(It is determined…
Part Number: LM25180-Q1 Other Parts Discussed in Thread: LM25180 Hi expert,
My customer is using LM25180 to design 3-ch isolated power supply.
Input voltage is 12V, output voltage is 15V. The inductor of transformer is 25uH, the turn ration is 12:18:18…
Part Number: LM25180-Q1 Hi TI,
I am designing a ioniser, can I use a PSR flyback IC with a high turn ratio transformer to create a -10kV output?
If this does not make sense, please give me some advises about this application.
Part Number: LM25180-Q1 Hi,
We are testing the product with EOL and found that t he output voltage of some boards deviates.
After verification, it is due to the difference of the transformer.
And the turn ratio of the transformer is OK, there is only difference…
Part Number: LM25180-Q1 Hi,
The customer will review the LM25180-Q1 for the inverter project.
Please share your email for a private Schematic review.
Operation : 9-16V / Vo = 18V
DCLINK : 800V Spec 1 : U/V/W typ : 0.2A
UVWL typ : 0.6A Spec 2 :
U/V/W typ…
Part Number: LM25180-Q1 Other Parts Discussed in Thread: LM25180 , Hello,
We are using an LM25180-Q1 to to generate +/- 15 output supplies. While using the LM25180 PSR flyback quickstart design tool, the Minimum Magnetizing Inductance is given as 23.0 uH…
Part Number: LM25180-Q1 Other Parts Discussed in Thread: LM25180 , LM25184 , LM25183 Hello experts,
I want to use LM25180-Q1 in my new project. My input is 8-15V, output is 12.5V 1.5A >15W isolated output. but When I tried on WEBENCH, it showed…