Part Number: LM2901V-Q1 Other Parts Discussed in Thread: LM2901 Tool/software: Dear Sir,
We are using below part number in one of our project,
please provide PSPICE model for the simulation, Smoke and monte carlo analysis.
Part number – LM2901VQDRQ1…
Part Number: LM2901V Tool/software: Hello Team,
we are using LM2901V in one of the circuit. As we are using a single operating supply voltage of +12V to GND.
I need to know if applying a negative voltage (-12V) to its input will cause damage to the…
Part Number: LM2901V Other Parts Discussed in Thread: LM339 Hi All,
Need your help to confirm if it is ok to apply ~1.1V (12 V is sensed via 10K, 11K resistor divider network) at one of its input pin before applying power at VCC pin of LM2901V. Datasheet…
Part Number: LM2901V-Q1 Hi TI-team
My customer is using LM2901V-Q1.
Would you please check the peripheral circuit diagram ?
If you can confirm it, I will send you the circuit diagram by registering as a friend.
Best Regards,
Koji Hayashi
Part Number: LM339 Other Parts Discussed in Thread: LM139 , LM239A , LM239-N , LM2901-N , LM2901V , LM2901 , LM239 Hi,
we wanna use the LM339 in our design. The junction temperature of this device is quite limited and we wondering if the Tjmin (0degC…
Part Number: LM339 Other Parts Discussed in Thread: LM2901V , LM239A , , LM139 , LM139A , LM2901AV , LM239 , LM2901 , The LM339 data sheet (SLCS006T) states (Section 8.3 Feature Description): "The output NPN sinks current when the positive input voltage…
lm139.pdf
hi,
Attached is the datasheet I’m using, I couldn’t find any information in it regarding what to do with unused input pins. I’m hooking the positive supply to 15V and the negative supply to ground.
Regards,
Eric
Part Number: LM2901 Other Parts Discussed in Thread: TLV1704 , TLV1701 , LM339 , LM393
Dear Sir, please answer
There is feature description from LM2901 datasheet, page 10: "The output NPN sinks current when the positive input voltage is higher than…
