Part Number: LM48310 The data sheet describes the output uses a modulation scheme that provides for filter-less operation, but the modulation method is not described or identified. The data sheet does not show the time domain relationship between the…
Ben,
You can use the codec for echo cancellation assuming the eco cancellation is done on an external DSP.
The MICBIAS can be connected to multiple mics as long as you observe the 4mA @2.5V current sourcing limit.
best regards,
-Steve wilson
Part Number: LM48310 Other Parts Discussed in Thread: LM48312 , LM48311 , I don't find such on TI's site or the web, in general. Can you supply?
Thanks!
Part Number: LM48310SDBD_NOPB Hey guys, I've been developing my own pcb that is a circuit comprising of the Teensy 3.2 , Pjrc Prop shield , and Sparkfun 5v/1A boost converter (to power the Audio amplifier - LM48310 ). I'm using the Teensy audio library…
Part Number: LM48310SDBD_NOPB Not sure why the other thread was closed as my issue hasn't been resolved.
Previous Thread: e2e.ti.com/support/amplifiers/f/14/t/844884
My thread on PJRC Forum: https://forum.pjrc.com/threads/57863-Diy-Prop-shield-LM48310…
Part Number: LM48310 Hello team,
I would like to know about LM48310 Output Short Circuit Protection with Auto Recovery. What is the current shrethold of Short Circuit Protection? Best Regards, Akihisa Tamazaki
Hi,
Sorry for leaving this thread behind, although this was being handled offline through FAE.
If you're still interested in other parts similar to LM48310, you could consider some devices like TPA2005D1 or TPA2011D1.
Best regards,
-Ivan Salaza…
Part Number: LM48310 Hi,
I am using LM48310 in my design which would drive a speaker. The speaker will be placed close to the amplifier on the board. Should I use an LC filter or ferrite bead at the output of the amplifier for obtaining a good quality…