Part Number: LMC6064 What is rail to rail supply voltage of LMC6064 Precision CMOS Quad Micropower Operational Amplifier??
I have tried +5V to 4 no. pin and -5V to 11 no. pin but the IC was burnt.
Part Number: LMC6064 Other Parts Discussed in Thread: ADS7852 , OPA4187 Hi guys,
My customer is using LMC6064 and has the following question:
I’m taking the reference of 2.5 from the ADS7852YB, doubling it to 5 using an OpAmp, then a second OpAmp unity…
Part Number: LMC6064 Hi folks,
I built a 24-channel ADC signal conditioning module using six LMC6064AIM chips. I am using them on a +10.5V single supply in a non-inverting 2x gain configuration to amplify low-frequency (< 10 Hz) signals from 0-5V to a…
Hello Shekhar,
I suggest a quad, ultra-low input current op amp such as the LMC6464 or LMC6064. Their input bias current should not load the gas sensor and the supply current is very low so little heat should be generated.
http://www.ti.com/lit/ds/symlink…