Part Number: TM4C123GE6PM Other Parts Discussed in Thread: UNIFLASH , LMFLASHPROGRAMMER Tool/software: I have programmed and setup the BOOTCFG register with the following code: #include <stdint.h>
#include "inc/hw_memmap.h"
#include "inc/hw_types.h…
Part Number: TM4C123GH6PM Other Parts Discussed in Thread: LMFLASHPROGRAMMER Hi Folks,
I need some suggestions. I have two program files (.bin). Either I can use LMFlashProgrammer and run on my custom board with a TM4C123GH6PM chip setting the offset…
Part Number: TM4C123GE6PZ Other Parts Discussed in Thread: LMFLASHPROGRAMMER Hello Team,
We have plans to change Microsoft Win10 LTSB 2016 to LTSC 2021 and want to know if it is compatible. Are the two drivers listed below compatible with the newer…
Other Parts Discussed in Thread: LMFLASHPROGRAMMER Hi,
I have a TI microcontroller than I can flash with LMFLASHPROGRAMMER in windows using UART and a bootloader
Ideally I want to be able to reflash this unit remotely, but all I have available is…
Part Number: EK-TM4C1294XL Other Parts Discussed in Thread: LMFLASHPROGRAMMER
Hi,
I dusted off an old board I had for a usb host application and successfully ran the usb_host_msc example application and while attempting to make further changes to…
Part Number: TM4C129ENCPDT Other Parts Discussed in Thread: LMFLASHPROGRAMMER , UNIFLASH Hello,
We have made a custom board using TM4C129ENCPDT microcontroller and we are using ICDI to upload the code to the board and we are using code composer studio…
Other Parts Discussed in Thread: LMFLASHPROGRAMMER We are using TIVA Launchpad programmer and LM flash utility for programming many of TM4C129 cards. However, in 2 of these programmers, we don't see any JTAG output on the ICDI controller IC U2 present…
Part Number: TM4C123GH6ZRB Other Parts Discussed in Thread: LMFLASHPROGRAMMER
Hello,
I have recently started experiencing some programming failures when working with the TI bootloader loaded in ROM on the TM4C. We have experienced this issue on both…
(Replying to myself.)
I'll try using LMFlashProgrammer on a Windows machine tomorrow (it doesn't like virtual machines).
Anyway, I don't think I blew up the 1294, I just think that it's loaded with poison firmware. (Which is a scary thought.)
.…
Part Number: EK-TM4C1294XL Other Parts Discussed in Thread: LMFLASHPROGRAMMER , UNIFLASH When I visit the Ti web page for the LM Flash Programmer ti.com/tool/LMFLASHPROGRAMMER I found no documentation on how to use it there. No user manual and no programing…
