Hello Pranjal,
If Windows is not recognizing the ICDI due to a driver issue, you can use the follow driver files to reinstall them: http://www.ti.com/tool/STELLARIS_ICDI_DRIVERS
If the ICDI got corrupted, you can use the LM Flash Programmer software…
Seong,
Thank you for your response.
I understand as followings. Could you please correct if anything?:
- Standard or general UART hosts, other than MSP-BSL, are possible devices to do BSL communication with MSP432E411Y.
- Today a good Windows…
Hello Daniel,
Yes, use our LMFlash Programmer tool found here: http://www.ti.com/tool/LMFLASHPROGRAMMER
With this tool, go to the Other Utilities tab and use the Debug Port Unlock feature for TM4C123 class devices (see below). Follow the prompted…
Part Number: LM3S2965 Other Parts Discussed in Thread: EK-TM4C123GXL , LMFLASHPROGRAMMER , LM3S1968 Hi All,
Our company need still support to the obsolete LM3S2965 MCU. To program the flash memory we were always using the development board EK-LM3S1968…
Part Number: LAUNCHXL-CC2640R2 Other Parts Discussed in Thread: LMFLASHPROGRAMMER , TM4C1294NCPDT Hi :
I have Launchxl - cc2640R2 . When connect to computer , the computer recognize Stellaris Device Firmware Upgrade .
So I use LMFlashProgrammer…
Bob,
these are the steps I followed:
-erased the target board via JTAG
-open LMFlashProgrammer, set UART with auto baud rate, transfer = 60, program address offset = 0x0
-connect the launchpad RXD and TXD pins to UART0 port of the target board…
Hello Matthew,
If you can program the device, just program one of our TivaWare examples such as blinky.
If you cannot program the device due to your code changes, you can unlock the device with LM Flash Programmer by using the Debug Port Unlock…
Hi,
The mentioned board on the title is EK-TM4C123GXL. This is a LaunchPad based on TM4C123GH6PM MCU. You seem to use a tool for Stellaris MCU, not for Tiva or TM4C123 MCU. if you need to program the part, you should use either CCS or LM flash programmer…
Hi Christopher! Thank you for your replay. I`ve installed LMFLASHPROGRAMMER, but when I check the folder "C:\Users\<YOUR USERNAME>\Documents\DSEvalSW\ there is the only folder inside "Logs". Additional information: each log files in the Logs folder contains…
Hello Gohith,
You may need to unlock the device via LMFlash Programmer: www.ti.com/.../LMFLASHPROGRAMMER
Give that a try and see if debug can be restored.
If you continue having issues, it may be good for you to download CCS (it's free) just…
