Hi Charles,
Thanks for the clarification.
Since there are no messages on UART0, how to evaluate if IC is booting properly and do initial programming or verifying the board?
Using LMFlashProgrammer?
Could you please provide a little more detail. I am not familiar with LM Flasher, but I found something called this on the TI site.
http://www.ti.com/tool/LMFLASHPROGRAMMER?keyMatch=LM%20FLASH%20PROGRAMMER&tisearch=Search-EN-everything#descriptionArea…
Part Number: TM4C123GH6PGE Other Parts Discussed in Thread: UNIFLASH , LMFLASHPROGRAMMER Hello Everyone!
We are trying to program tm4c123gh6pge on our custom board for a project which uses ADC and CAN.
At first we didn’t entered any clock setting…
Hello Mustapha,
We are both in that boat right now, I also reviewed past issues for one that may explain your problem but came up empty, and it's not an error that's exactly easily recreateable for us.
Can you try doing the following?
1) Download…
Hello Erich,
I was googling some and it sounds like the issue is not a hardware one as much as Uniflash/Windows being the problem. Can you run it under Administrator mode and see if that solves the issue? Also reports of restarting PCs or reinstalling…
Hello Akin
Licensing issues can be resolved by Code Composer Studio Forum.
Regarding the LMFlashProgrammer and Stellaris ICDI unlock of the device make sure that the following steps are done in the correct order
1. Power Up the Board with Reset…
Hi Brian,
So I had been under the impression that Uniflash would just invoke the boot loader when it was properly programmed in, but it looks like it operates more like CCS and it doesn't try and invoke the boot loader at all. Perhaps via command line…
Happy new year.
The combinations that did not unlock/erase the LaunchPads were:
- Win7 LMFlashProgrammer 1463
- Win8.1 LMFlashProgrammer 1588
I got it unlocked and erased by
- Win7 LMFlashProgrammer 1601
Now the board is working with Keil…
Hello Charles,
I came across to this post as we using TM4C123GH6PM MCU on a board design and it got locked.
I checked the pdf you had shared, the LMFlashProgrammer utility only supports the Stellaris ICDI, so it not applicable for my case.
Is there…
OK, two things to try. ITry a different USB cable and a different USB port (on rare occasions I have seen that resolve a problem. The second thing is download and install the older tool LM Flash Programmer ( www.ti.com/.../LMFLASHPROGRAMMER) . That tool…
