Part Number: LMH32401-Q1 Hi
Looking through the datasheet of LMH32401-Q1, I can't find any info related to linearity metrics: HD2, HD3, THD, IM3, etc.
Only linear input range is mentioned, yet it's not enough for analog design
Why is it so?
Can…
Part Number: LMH32401-Q1 Hi
Looking through the datasheet of LMH32401-Q1, I can't find any info related to linearity metrics: HD2, HD3, THD, IM3, etc.
Only linear input range is mentioned, yet it's not enough for analog design
Why is it so?
Can…
Part Number: LMH32401 Other Parts Discussed in Thread: LMH34400 , OPA858-Q1
Hi Team, seeking for a suggestion
looking for transimpedance amplifier with a high bandwidth to receive and amplify signals comprising frequencies between 1 kHz and 20 MHz…
Part Number: LMH32401-Q1 Hi
Many parameters in the datasheet have quite high variation between min and max value.
For example,
Small transimpedance gain varies from 1.75KΩ to 2.25KΩ.
Differential output offset voltage varies from -12mV…
Part Number: LMH32401 Other Parts Discussed in Thread: OPA2182 Hi Team
Hello, I am trying to have an analog front-end transimpedance amplifier for our sensor. When designing the PCB, the most common solution would be having a SMA socket on the broad…
Part Number: LMH32401 Hi,
Can the gain of LMH32401 be changed dynamically while IDC_EN is LOW(enabled), by toggling the GAIN pin to HIGH or LOW via a microcontroller or any other digital circuit?
thanks,
Krishna
Part Number: LMH32401 Other Parts Discussed in Thread: OPA855 , OPA3S2859 , OPA859 I'm trying to make a circuit to detect single-photon pulses on an avalanche photodiode (APD). I'm starting with an S14422 APD.
I don't have a model for the current pulses…
Hello AJ,
Please refer to the following:
"When the amplifier is in its low-power mode, the clamp circuitry is still active thereby protecting the TIA input. The ambient light cancellation loop is disabled when the amplifier is placed in power-down…
Part Number: LMH32401 Per the datasheet, this iC does not appear to be automotive qualified.
Does TI plan to have this chip qualified to AEC-Q standards in the short or long term?
If not, is there a form/fit/function equivalent of that iC that has…
Part Number: LMH32401 hello there
I want to learn about the relationship about the figure 6-9 low -side frequency response vs ALC and 7.4.1 Idc loop has a high pass cutoff frequency of 100hz.
how to understand this two part.
BRs,
Shubiao
