Part Number: LMH6552 Other Parts Discussed in Thread: TINA-TI Hi team,
Does the chip support (2-3V) Vpp 1.25GHz freq Vin to 8V Vpp 1.25GHz freq Vout application scenarios? And could you tell how to calculate it?
Part Number: LMH6552 Hi team,
Could you help check the schematic as below? Inout AC=1.5V Vpp, DC=0V, power supply is ±5V, but the output voltage follows the positive voltage. For example, when the power supply is 5V, the output voltage is above 4V not…
Part Number: LMH6552 Hello,
Is it allowed to connect a voltage source (0.7V) to the VCM of the LMH6552 before connecting its supply voltages?
Regards,
Giora
Part Number: LMH6552 Hello Sir,
We have one schematic about LMH6552 need you help to double check, since the schematic is confidential, so would you like to share one windows about it? or you can send one email to me to discuss it off line.
Thanks…
Part Number: LMH6552
Hi team，
I use the values in table 1 to emulate the figure 45 circuit, but the output gain is inconsistent with the values in table 1.What might be the cause
LMH6552_schematic.TSC
Part Number: LMH6552 Other Parts Discussed in Thread: THS4541 , LMH6554 Hello,
Customer use a full differential operation amplifier LMH6552. In practice, there is a error between out+ and out-. I use TINA to simulate the FDA LMH6552, with different…
Part Number: LMH6552
Hello,
I would like to know the surface mount resistor package that is used for the LMH6552 DEVAL board as I could not find it in the datasheet. Is it 0603, 1206 .. etc ?
Thanks
Part Number: LMH6552 Hi Team,
We are using LMH6552 in oscilloscope AFE, to convert SE to differential signal to drive ADC. Schematic shows below:
We use 1kHz square wave to input the circuit, generally we wish to get a pure square waveform at the…
Part Number: LMH6552 Other Parts Discussed in Thread: LMH6551 , Hello Team,
cutomer took IMD measurements and have following question:
"My colleague, Ryan, has taken over the measurements of the LMH6552 and LMH6551 samples that you gave me. His…
