Part Number: LMH6572 Other Parts Discussed in Thread: OPA3875 , TS3V713EL Hi Experts
We are finding VGA RGB signal 4(input) to 1(output) mux for the server product ,I see the LMH6572 may meet this application.
1. Please double check the application
2. Please…
Hello Tony,
The snippet of the schematic shared above is from the original national semiconductor test solution. The datasheet is the original datasheet, but was later edited/adapted to TI's guidelines. Specs would not have changed in this case. Thank…
Hello,
I think the first thing we should do is disconnect the LMH6586 from the circuit and just pass your signal form the connector straight into the LMH6572
If you could send screenshots of the waveform and more info after trying this that would be a…
Part Number: LMH6572 Other Parts Discussed in Thread: OPA3875 ,
Hi, OPA3875 has trouble on the delivery date. With that background, Customers are considering LMH6572 instead of OPA3875. Customer wants to replace OPA3875 with LMH6572 while keeping peripheral circuits…
Part Number: LMH6572 Hi
We are about to use LMH6572 in single supply solution.
Regarding to the following image, is my understanding correct?
BestRegards
Other Parts Discussed in Thread: LMH6572 Hi team,
Our projector customer needs a 2:1 video multiplexer for WUXGA signal (1920 * 1200 @ 60Hz), is that possible for LMH6572 to realize it?
If not, is there ohter solution for this case?
Thanks a lot for your…
Other Parts Discussed in Thread: LMH6572 , TINA-TI , LMH6570 , LMH6714 , LMH6514 Hello, my design group is planning to use LMH6572 and 6570 parts into our new product. However, I could not find any Spice model on line which will affect our simulation results…
Other Parts Discussed in Thread: LMH6739 , LMH6704 , LMH6574 , LMH6572 , LMH6570 , THS7353 , THS7365 , THS7376 , THS7303 , THS7373 , THS7368 , THS7327 , THS7364 , THS7372 , THS7360 Hi,
I’m trying to design an amplifier for HD-TVI video. Do you have any amplifiers that…
Other Parts Discussed in Thread: LMH6570 , LMH6572 , OPA3875 , OPA875 Hi
I need an analog video Mux (Quad 2:1 ) and one 2:1 for anaog video multiplexing. Is PI5V330 and LMH6570 are suitable for my application ?
any other suggestion ?
or LMH6572 and LMH6570…
Hi Charlie,
To answer your questions:
1. The disable_bar pin current is up to 350uA (in low state). So, if you are driving all three of these together, you need to allow for 3x (or about 1mA). To limit the voltage on this pin to below the low threshold…