Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
Part Number: LMH6628QML-SP Other Parts Discussed in Thread: LMH6628 , Hi,
we use the LMH6628WGFQMLV (5962F0254501VZA) for a space project as video input buffer. Actually we do a radiation analysis and have some troubles with the LMH6628.
In general there…
Part Number: LMH6628QML-SP Hello support team.
For a current product we assemble the LMH6628WG-QML several times and we do have an issue with the current consumption. The datasheet states a max. supply current of 25mA for the whole part when no load is…
Part Number: LMH6628QML-SP Other Parts Discussed in Thread: LMH6628QML , LMH6628 , Question from a customer-
We are proposing to do some radiation testing for a customer on several parts including the LMH6628QML (5962F0254501VZA), which was the quote we…
Hi Alec,
this is understood. But this was not the answer to my question.
I want to use the SEE test results from ESA/GAIA Project (which I sent in the link above). We will still use LMH6628QML-SP for space flight. But we need some evidence concerning SEE…
Part Number: LMH6628QML-SP Other Parts Discussed in Thread: LMH6628 , OPA837 , OPA858 Hello, for a new design I need a buffer in a redundant configuration. Therefore, I want to combine the output of two LMH6628 components. Only one of the two components…
Part Number: LMH6628QML-SP Other Parts Discussed in Thread: LMH6628 Hello, for an actual project we want to buffer an analog 0V to 5V / 12MHz signal with the LMH6628QML-SP. To get an output swing of 0V to 5V the buffer shall be supplied with -2.5V / …
Outgassing is avoided and tested only for space-rated devices, i.e., LMH6628QML-SP. The plain LMH6628 uses a different package and is likely to fail any outgassing test.
Part Number: LMH6628QML-SP Other Parts Discussed in Thread: TINA-TI , LMH6628 , LM98640QML-SP Hi Team,
According to the datasheet of LMH6628QML-SP, the device is capable of a typical output swing of ±3.8V from a supply voltage of ±5V. Our customer…
Part Number: LMH6628QML-SP Other Parts Discussed in Thread: OPA2822 , OPA2652 , OPA2677 , LMH6628 , Hi experts!
My customer has a design where they had been planning to use this part with a 5V single supply. They recently realized this is right at the low…
