Hi ttd,
LMK00308 and LMK00301 are comparable to LMK00306 performance and functional wise. Only LMK00304 has the functional difference that I described above.
regards,
Julian
Part Number: LMK00306 Other Parts Discussed in Thread: LMK03806 , Hello team,
I received a questions from the customer.
There is an input requirement for OSCin on p.8. Are there any specifications regarding the input signal format (CMOS or square wave) and…
Part Number: LMK00306 We're considering this part for a new design, but we concerned about the DC current path requirement between the differential outputs.
In our design, this chip would be driving a large-scale FPGA reference clock that requires…
Part Number: LMK00306 Dear,
For a project in development, we work with the ZCU102 Evaluation Kit (including Zynq UltraScale+ ZU9EG) for a demonstrator.
And to drive RF switch from 50 MHz (with Duty cycle at 50% max) to ~ 3.3MHz (with duty cycle at 3%)…
Part Number: LMK00306 Hi team,
I wonder the minimum input frequency for CLKin0/0* and CLKin1/1*. As per the DS, it will be all the way down to DC. But could you help me to understand what 'DC' exactly means?
Having said that if CLKin0 is 0.2…
Part Number: LMK00306 Hi team,
I have a question on the OSCin/out configuration.
As in the figure above, usually for the crystal interface, there requires Rfb, feedback resistor, to bias the internal digital inverter to serve as an analog amplifier…
Part Number: LMK00306 Hi team,
I wonder if we have a specific targeting application for OSCin and OSCout. I thought in most application two CLKin/CLKin* are enough for designs. What's the merit of crystal IN port?
In addition, I wonder if we have…
Part Number: LMK00306 Hi team,
I'm looking into LMK00306 and Si53301 to compare advantage/disadvantage of each part. While checking the pin-out, I found LMK00306 is larger (6x6mm 36-pin over 5x5mm 32-pin of Si53301) and the additional 4-pins consist…
Part Number: LMK00301 Other Parts Discussed in Thread: LMK00306 , Hi expert,
Customer has a differential clock input 156.25Mhz on LMK00301 or LMK00306. Below is their measured waveform. Could you please help us understanding what does the datasheet VIHD…
Part Number: LMK00306 Hi all Would you mind if we ask LMK00306? <Question1> LMK00306 doesn't have input termination resistance, right? So, does it require external termination resistance at input? <Question2> The customer would like to use two…