Part Number: LMK03318EVM Tool/software: Y1 on my EV board runs around 761Hz, not the 50MHz that is supposed to run. I have changed the crystal Y1, but the output of the crystal is still between 750-760Hz. The crystal needs to be above 10MHz to for the…
Part Number: LMK03318EVM Tool/software: Hi,
For programming the EEPROM page from TICS Pro on this EVM, is it necessary to have the GPIO[3:2] headers be correctly coded as well, during the write operation? Or, is it enough to have the correct EEPROM…
Part Number: LMK03318EVM Other Parts Discussed in Thread: LMK03318 , USB2ANY , CDCEL925 , CLOCKPRO , Tool/software: Hi,
I am trying to program the LMK03318 on the EVM with the USB2ANY module. I have been able to update the firmware of the USB2ANY and…
Part Number: LMK03318EVM Other Parts Discussed in Thread: LMK03318 , USB2ANY Tool/software: Hi Derek,
I de-popped the 0 Ohm R166 and R167. However, I am still unable to program the LMK03318 with external USB2ANY Dongle. I am using jumper wires for…
Part Number: LMK03318EVM Other Parts Discussed in Thread: USB2ANY Tool/software: Hi,
I connected pins SDA, SCL, GND of the USB2ANY module to the EVM. The orange SDA LED stays lit on. The EVM updated the firmware of the USB2ANY and when asked to identify…
Part Number: LMK03318EVM Other Parts Discussed in Thread: LMK03318 , CDCE6214 , CDCE6214-Q1 Tool/software: Hi,
I have a test board where I need to check the jitter tolerance of the clock. I am looking for a external lcok source to generate a single…
Part Number: LMK03318EVM Tool/software: Hey,
We are having some issues with the LMK03318EVM. We remember it was working a few months ago. But now the clock outputs look strange. In order to debug we are investigating the SECREF output, hence bypassing…
Part Number: LMK03318EVM Hello Team,
Posting on behalf of my customer:
Can you share with us the CAD model (3D model) of the LMK03318EVM?
Regards,
Renan
Part Number: LMK03318EVM Other Parts Discussed in Thread: LMK03318 Hi,
I first run the LMK03318EVM and can see some clock outputs. Then i tried to download my configuration into the EEPROM. I may made some mistake. now the board cannot output any signals…
Part Number: LMK03318EVM Hi Team,
. I want to use the on board XTAL, and hence the Secondary input into the PLL. I configured all the internals with the GUI to do this and all looked good, but when programmed I got no output at all.
I had the REFSEL…
