Prasoon,
These can both be on the same I2C bus. However, the software for interfacing with each is different and requires different hardware. LMK033x8 can be programmed using TICS Pro with the USB2ANY, which is straightforward. For the CDCE913, you will…
JinBae,
The LMK03806B profile does not offer readback. The software only supports write-only mode.
I have had more success using the LMK04806B GUI in VCO2 only mode with the LMK03806B board. I have attached a sample register file here that can be used…
Part Number: LMK03806 Other Parts Discussed in Thread: LMK03328 Tool/software: Hello,
I am planning on using the LMK03328 in our design. I have some questions relating to the jitter performance. Is jitter performance different if I use a 100 MHz reference…
Part Number: LMK03806 Tool/software: Hello,
My customer has some questions about the LMK03806.
Q1. LMK03806 has charge pump gain adjustment options as below. What difference does each setting value make to the PLL operation or environment?
Q2.What is…
Part Number: LMK03806 Hello
I am using the LMK03806BISQE_NOPB part on my board.
The uWire is working; it was tested by toggling the FTEST/LD as per the suggestion in the datasheet.
I am loading registers as per the attached figure. The relevant schematic…
Part Number: LMK03806 Hello,
My customer has noticed that the datasheet for LMK03806 has been revised.
Among the revisions, they confirmed that the capacitors that appear as options on the left have been changed to mandatory on the right, as shown below…
Part Number: LMK03806 Hi,
I am using LMK03806 in my design. I need to generate 210 MHz with reference input of 10 MHz. Register settings are attached. With the mentioned Register settings, it is generating 227 MHz frequency. Kindly go through the Register…
Part Number: LMK03806 Other Parts Discussed in Thread: PLLATINUMSIM-SW Hi,
I am using the Clock Design Tool to generate a viable configuration.
This includes the recommendation of the loop filter.
However it is not clear to me how to actually connect…
Part Number: LMK03806 Hello,
My customer wants to change the design of the external loop filter of the LMK03806. What external loop filter design and simulation tools do you recommend for the LMK03806? Please also provide the user guide of the design tools…
Part Number: LMK03806 Hello：
The Clock Generator LM03806 IBIS version on TI's official website is relatively old, and some errors were found in use, as shown in the figure below. Please provide the latest IBIS model of the device, thank you!
