Search tips
Showing 32 results View by: Thread Post Sort by

  • LMK05028EVM: EVM config setting and sync issue

    TI Thinks Resolved
    Part Number: LMK05028EVM Other Parts Discussed in Thread: LMK05028 Hi Teams, My customer want to operate the LMK05028EVM in 2 loop mode which only enable the reference inputs and XO. (They will use OCXO to replace XO in final design.) Q1. When they are…
    • Answered

  • LMK05028EVM: DPLL Phase Lock Detectors setting

    Resolved
    Part Number: LMK05028EVM Other Parts Discussed in Thread: LMK05028 Hi, Let me ask you some questions about DPLL Phase Lock Detectors setting. My customer has been evaluating LMK05028EVM with TICS Pro. The customer would like to make 2 clocks from OUT7…
    • Resolved
    • Answered

  • LMK05028EVM: Modifying reference clock initial configuration

    Resolved
    Part Number: LMK05028EVM Other Parts Discussed in Thread: LMK05028 , USB2ANY Hi team, My customer is trying to modify LMK05028 reference clock selection setting on the EVM. Please allow me to ask you a couple of questions. 1. Is USB2ANY needed to modify…
    • Resolved
    • Answered

  • LMK05028EVM: TIICSPRO .tcs data

    Resolved
    Part Number: LMK05028EVM Other Parts Discussed in Thread: LMK05028 , LMH1981 Hi all Would you mind if we ask LMK05028EVM? Our customer tries to configure following system using LMH1981 and LMK05028. In case video format NTSC 525i, they would like to conf…
    • Resolved

  • LMK05028EVM: How to programming LMK05028(DUT) in evaluation module by external board?

    TI Thinks Resolved
    Part Number: LMK05028EVM Other Parts Discussed in Thread: LMK05028 , Hi, I have a LMK05028EVM board. How I programming LMK05028 (DUT) in this board by other board through I2C interface? and how to connect these boards?

  • LMK05028EVM: Why does setting R12[7] twice at the end of configuration not work?

    TI Thinks Resolved
    Part Number: LMK05028EVM Other Parts Discussed in Thread: LMK05028 After reconfiguring the LMK05028 device using the I2C interface the datasheet section 9.5.5 says 5. Write 1b to R12[7] to assert soft-reset. This does not reset register values. 6. Write…
    • Answered

  • LMK05028EVM: XO, TCXO spec on EVM

    Resolved
    Part Number: LMK05028EVM Hello, My customer would like to know a spec of XO and TCXO on EVM. I've checked TXC web site but could not find below part number. > XO：　TXC Corporation: 8W48070002 > TCXO：TXC Corporation: 7N10070005 Can I have specification…
    • Resolved
    • Answered

  • LMK05028EVM: LOPL_DPLLX, LOFL_DPLL and HLDOVRX

    Resolved
    Part Number: LMK05028EVM Hi all Would you mind if we ask LMK05028EVM? We use TICS-PRO and TICS-PRO shows LOPL_DPLLX, LOFL_DPLL and HLDOVRX. Using LMK05028EVM with default setting input frequency=25MHz LVCMOS, LOPL_DPLLX, LOFL_DPLL and HLDOVRX occur. In order…
    • Resolved
    • Answered

  • LMK05028EVM: In case of LVCMOS input

    Resolved
    Part Number: LMK05028EVM Other Parts Discussed in Thread: LMK05028 Hi all Would you mind if we ask LMK05028? <Question1> In case of LVCMOS input at INPX, there is the description as follow; Does INX_N require pull down with external 10kohm? We assume that…
    • Resolved

  • LMK05028EVM: lmk05028 EVM problems

    Part Number: LMK05028EVM Other Parts Discussed in Thread: LMK05028 Hi Team, Our spectrum analyzer project in ZTE found some LMK05028 problems. Problem 1: Change the 10MHz ref0 input signal to 10.1MHz for 10 seconds. Change the ref0 input back to 10MHz. We…

Didn't find what you are looking for? Post a new question.