Part Number: LMK05318BEVM Tool/software: Hi !
The precedent thread has been locked so I continue here.
I've got a 1Hz signal (this is the GPS' synchronization PPS) that arrives in the LMK05318BEVM.
I would like to have this same signal coming…
Part Number: LMK05318BEVM Other Parts Discussed in Thread: LMK05318B , USB2ANY , Tool/software: Hi team,
In accordance with instruction of LMK05318B Wizard, my customer clicked "Write All Registers".
However, below error massage showed up. What…
Part Number: LMK05318BEVM Other Parts Discussed in Thread: LMK05318B Tool/software: Hello,
I have a 1Hz signal (this is the GPS' synchronization PPS) that arrives in the LMK05318BEVM.
I would like to have this same signal coming out of the LMK05318BEVM…
Part Number: LMK05318BEVM Tool/software: Hello team,
Would it be possible to share the size of this EVM? (Length, Width, Height)
OR is it possible to share the 3D CAD data?
Best Regards, Kei Kuwahara
Part Number: LMK05318BEVM Hi, we are attempting to use the LMK05318BEVM to discipline form a 1pps source. We have use the internal XO and an external signal generator (@12.8MHz) to no avail. With a 1pps signal on PRIREF - we are not seeing the PRIREF_VALSTAT…
Part Number: LMK05318BEVM Other Parts Discussed in Thread: LMK05318B , LMK5B33216 I have a 10 MHz clock signal and I am attempting to create a frequency-syntonized output with a known phase offset.
I have the 10 MHz input connected to PRIREF with the DPLL…
Part Number: LMK05318BEVM Other Parts Discussed in Thread: LMK05318B Hi ,
This is regarding the requirement of configuring the LMK05318B chip for varying reference clock when connected to a Host controller on the final finished product. Since the change…
Part Number: LMK05318BEVM Other Parts Discussed in Thread: LMK05318B I have tryed to following clock generation on the EVB.
Settings and puopose
Input 12.8 MHz from 50ppm SG to XO Input 10 Hz from 50ppm SG to PRIREF Output 8 MHz synchronized to PRIREF edge…
Hi Steven,
Thank you for providing the files. At a glance, I notice that you have SYNC enabled for some of your outputs.
If you program these settings to the EEPROM, after power down, the outputs may or may not be disabled. This is because the global…
Part Number: LMK5B12204 Hi,
How can the in chip EEPROM be programmed using an external Host controller. Since as of now the TICSPRO Config file is finalised for a specific frequency plan. Hence, the proper sequence of the steps to do the one time EEPROM…
