Update: I have tested the board and saw no issues with the outputs. The previously provided config (attached) outputs 400 MHz as expected given 25 MHz input.
e2e_LMK05318BEVM brand new LMK05318BEVM appears to be dead on arrival_Oct 24 2022.tcs
Regards…
Part Number: LMK05318BEVM Other Parts Discussed in Thread: LMK05318B I am trying to use the LMK05318B to lock the 2.5 GHz BAW to an external 10 MHz reference and output 250 MHz. The 10 MHz XO is a high quality Wenzel Oscillator source (so I am not worried…
Part Number: LMK05318BEVM Other Parts Discussed in Thread: LMK05318B I have an EVM that I want to load a TICS Pro file from my design. It is working on the design but I am failing a clock phase measurement. I want to measure my exact settings on the evm…
Hi Riley,
The customer hasn't given me feedback for a long time. I think his problem has been resolved. Thank you for your support over this time.
Regards,
Amy
Part Number: LMK05318BEVM Hello E2E,
Our customer is working for evaluation with LMK05318B-EVM. It able to behavior when cascade mode, but it doesn't LOCK with select to XO. I received the tsc file from customer, I attached it. Please see it and advice…
Hi Nir,
You could use the DPLL Holdover Active bit to indicate when the DPLL reference is lost and the device has transitioned into holdover (APLL only mode). Again, this won't indicate if the APLL is locked. The APLL will lock to the XO if there is a…
Part Number: LMK05318BEVM
Hello all,
I'm using the LMK05318BEVM in a single 32MHz CMOS output (Only CH7 is active, all other channels are disabled via software GUI)
To my understanding, it is possible to leave all other power rails not connected for…
Part Number: LMK05318BEVM Other Parts Discussed in Thread: LMK05318B Hi expert,
Customer connected LMK05318BEVM as the EVM user guide, however, the GUI always shows " Device not connected". Could you please help to suggest how to solve this issue?…